SolarRadiationShield
About the SolarRadiationShield PCB
SolarRadiationShield is an open source PCB design by Abdenry, published on GitHub. It is a 2-layer board measuring 13 × 37 mm, with 4 components from 4 distinct parts.
It belongs with the sensors, power & battery and iot & wireless designs in this gallery.
From the project
IOT Sensor Hub using RF communications between sensors
A small, portable, self-sustaining weather station built to provide data to an external web interface hosted with Grafana via a Raspberry Pi Zero 2 W. This station is able to collect various metrics from on board sensors such as temperature, humidity, heat index, wind speed, and wind direction. A DHT22 sensor is used to collect relative humidity and temperature metrics with an accuracy of +-2% and +-0.5C, while metrics such as wind speed and wind direction are collected with custom built sensors. The heat index is calculated in software using the DHT-sensor-library.
SolarRadiationShield bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AHT20 | PinHeader_1x04_P2.54mm_Vertical | AHT20 |
| 1 | INSIG | PinHeader_1x04_P2.54mm_Vertical | INSIG1 |
| 1 | LPS331AP | PinHeader_1x09_P2.54mm_Vertical | LPS331AP1 |
| 1 | lpsExtraFunc | PinHeader_1x05_P2.54mm_Vertical | lpsExtraFunc1 |
SolarRadiationShield design files
The KiCad project lives in the Abdenry/sensorHubProject repository on GitHub; these links point at the commit this page was built from.
SolarRadiationShield: common questions
How big is the SolarRadiationShield PCB?
The SolarRadiationShield measures 13 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SolarRadiationShield?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SolarRadiationShield design files?
From the Abdenry/sensorHubProject repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SolarRadiationShield design in my own project?
The repository has no license, so all rights stay with Abdenry. Use it as a reference, and ask the author before reusing the design.
More boards in sensorHubProject
Similar boards
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ControllerCurrentShuntAddOn
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k