PQ Botnotsobot
About the PQ Botnotsobot PCB
PQ Botnotsobot is an open source PCB design by abelwu2001, published on GitHub. It is a 2-layer board measuring 64 × 58 mm, with 6 components from 3 distinct parts.
It belongs with the power & battery designs in this gallery.
From the project
Proyecto Final para el armado de un nanoSat
Este documento resume las placas, elementos estructurales, componentes externos, cableado y tornillería necesarios para el armado de la plataforma PocketQube.
Link de la wiki donde se explica todo sobre el proyecto:
- 4 integrados en las pqlatboard - 1 integrado en la pqbotboard - 1 en la PQMagYBoard`
Los magnetorquers integrados en las placas se forman mediante pistas/bobinas de cobre del propio PCB, por lo que no se compran como componentes independientes.
PQ Botnotsobot bill of materials (BOM)
6 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CES-110-02-L-S D2FLA Samtec | D2FLA | J1 |
| 1 | CES-110-02-L-S D2FLA1 Samtec | D2FLA1 | J2 |
| 4 | Silkscreen_Annotation | NSL_long | Annotation1, Annotation2, Annotation3, Annotation4 |
PQ Botnotsobot design files
The KiCad project lives in the abelwu2001/Picosat-Pocketcube-UTN-FRC-2026 repository on GitHub; these links point at the commit this page was built from.
PQ Botnotsobot: common questions
How big is the PQ Botnotsobot PCB?
The PQ Botnotsobot measures 64 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PQ Botnotsobot?
6 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PQ Botnotsobot design files?
From the abelwu2001/Picosat-Pocketcube-UTN-FRC-2026 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PQ Botnotsobot design in my own project?
The repository has no license, so all rights stay with abelwu2001. Use it as a reference, and ask the author before reusing the design.
More boards in Picosat-Pocketcube-UTN-FRC-2026
RP2040/RP2350EGSE
327 × 271 mm107 parts6LNo license3
PQ EPS
40 × 40 mm83 parts4LNo license3
PQ PL2
40 × 40 mm76 parts4LNo license3
STM32OBC&COMMS subsystem
40 × 40 mm68 parts4LNo license3
PCB P L2 PCB 2022-10-05
40 × 40 mm58 parts4LNo license3
RP2040/RP2350ADCS subsystem
40 × 40 mm57 parts6LNo license3
PQ BotBoard
64 × 52 mm24 parts6LNo license3
PQ Lat Board
48 × 48 mm17 parts6LNo license3
PQ1 TopBoard
50 × 50 mm12 parts2LNo license3
PQ MagYBoard
45 × 45 mm10 parts6LNo license3
PQ PL1
40 × 40 mm5 parts2LNo license3
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k