Boost-Converter
Abhi90808·Boost-Converter
About the Boost-Converter PCB
Boost-Converter is an open source PCB design by Abhi90808, published on GitHub. It is a 2-layer board measuring 30.9 × 30.2 mm, with 15 components from 11 distinct parts.
Other key parts include the MT3608. By type, the board carries 6 capacitors, 3 resistors, 2 connectors, 1 IC, 1 jumper and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
DC-DC step-up boost converter PCB that raises input voltage to a higher regulated output — ideal for battery-powered and embedded systems.
A solar Li-ion battery charger PCB using the CN3791 MPPT IC, designed in KiCad 8. Optimized for single-cell Li-ion charging from small solar panels with automatic maximum power point tracking.
The CN3791 tracks the solar panel's maximum power point using a resistor-set voltage reference on the MPPT pin. It implements CC/CV charging — constant current until the battery reaches 4.2V, then switches to constant voltage. This ensures the solar panel always operates near its peak power output regardless of battery state.
Main components on the Boost-Converter
Boost-Converter bill of materials (BOM)
15 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT3608 | SOT-23-6 | U1 |
| 1 | VIN_INPUT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | VOUT_OUTPUT | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | EN_JUMPER | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | SS34 | D_SMA | D1 |
| 1 | 22uH | L_Bourns_SRR1260 | L1 |
| 2 | 100uf | CP_Radial_D6.3mm_P2.50mm | C1, C3 |
| 4 | 100nf | C_0805_2012Metric | C2, C4, C5, C6 |
| 1 | 180k | R_0805_2012Metric | R1 |
| 1 | 20k | R_0805_2012Metric | R2 |
| 1 | 100k | R_0805_2012Metric | R3 |
Boost-Converter design files
The KiCad project lives in the Abhi90808/Boost-Converter repository on GitHub; these links point at the commit this page was built from.
- Layout8.Boost_Converter.kicad_pcb
- Schematic8.Boost_Converter.kicad_sch
Boost-Converter: common questions
How big is the Boost-Converter PCB?
The Boost-Converter measures 30.9 × 30.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Boost-Converter?
15 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Boost-Converter design files?
From the Abhi90808/Boost-Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Boost-Converter design in my own project?
The repository has no license, so all rights stay with Abhi90808. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k