PowerModule EasyEDA
Abhijit18·PowerModule_EasyEDA·reference/rev-b/XIAO_ESP32C3_UPS_RevB.kicad_pcb
About the PowerModule EasyEDA PCB
PowerModule EasyEDA is an open source ESP32 PCB design by Abhijit18, published on GitHub. It is a 2-layer board measuring 96 × 64 mm, with 27 components from 26 distinct parts.
Its main chip is the XIAO ESP32-C3, from the ESP32 family. By type, the board carries 17 connectors, 4 resistors, 2 diodes, 1 IC, 1 transistor and 1 relay.
It belongs with the power & battery designs in this gallery.
From the project
original/ is the owner's uploaded schematic and Gerber ZIP. rev-b/ are assistant-produced draft EasyEDA Standard and KiCad artifacts not independently verified inside EasyEDA Pro. These are historical references, not engineering release files; do not alter their contents. New edi
original/ is the owner's uploaded schematic and Gerber ZIP. rev-b/ are assistant-produced draft EasyEDA Standard and KiCad artifacts not independently verified inside EasyEDA Pro. These are historical references, not engineering release files; do not alter their contents. New editable designs belong in hardware/rev-c/ and in a separate owner-approved EasyEDA Pro project. Source files can contain errors and require datasheet + native net/readback validation. These files may be proprietary; review sharing before pushing to a public repository.
Main components on the PowerModule EasyEDA
PowerModule EasyEDA bill of materials (BOM)
27 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO ESP32-C3 | XIAO | U1 |
| 1 | BC337-40 | TO92 | Q1 |
| 1 | 5V_IN_EXT | TERMINAL2 | J1 |
| 1 | BATTERY_1S | TERMINAL2 | J2 |
| 1 | XIAO_BAT_WIRES | WIRE2 | J3 |
| 1 | MIC_3V3_PWR | TERMINAL2 | J4 |
| 1 | RELAY_DRY_CONTACTS | TERMINAL3 | J5 |
| 1 | D2_GND | HEADER2 | J6 |
| 1 | D3_GND | HEADER2 | J7 |
| 1 | D4_GND | HEADER2 | J8 |
| 1 | D5_GND | HEADER2 | J9 |
| 1 | D6_GND | HEADER2 | J10 |
| 1 | D7_GND | HEADER2 | J11 |
| 1 | D8_GND | HEADER2 | J12 |
| 1 | D9_GND | HEADER2 | J13 |
| 1 | D10_GND | HEADER2 | J14 |
| 1 | XIAO_CHG_PAD | TESTPAD | J16 |
| 1 | SW_OFF_SHORT | TERMINAL2 | J17 |
| 1 | XIAO_EN_PAD | TESTPAD | J18 |
| 1 | SRD-03VDC-SL-C | SRD3 | K1 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N5819 | D_AXIAL | D1 |
| 1 | 1N4007 | D_AXIAL | D2 |
| 1 | 100uF_6.3V | C_RADIAL | C1 |
| 1 | 330R | R_AXIAL | R1 |
| 2 | 47k | R_AXIAL | R2, R3 |
| 1 | 10k | R_AXIAL | R4 |
PowerModule EasyEDA design files
The KiCad project lives in the Abhijit18/PowerModule_EasyEDA repository on GitHub; these links point at the commit this page was built from.
PowerModule EasyEDA: common questions
What microcontroller does the PowerModule EasyEDA use?
The PowerModule EasyEDA is built around the XIAO ESP32-C3, from the ESP32 family.
How big is the PowerModule EasyEDA PCB?
The PowerModule EasyEDA measures 96 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PowerModule EasyEDA?
27 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PowerModule EasyEDA design files?
From the Abhijit18/PowerModule_EasyEDA repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PowerModule EasyEDA design in my own project?
The repository has no license, so all rights stay with Abhijit18. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PowerModule EasyEDA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k