14 open source boards using the XIAO-ESP32-C3
Real designs built with the XIAO-ESP32-C3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp32 turd scooter controller
d0ng3o
61 × 61.2 mm35 parts2LGPL-3.00ESP32
Buom c3-eco
ekt0810
60 × 40 mm30 parts2LNo license0ESP32
Usb c charge controller
cLLeB
51.2 × 24 mm20 parts2LNo license0ESP32
Focus buddy
hexa3
106 × 64 mm18 parts2LNo license0Starbie-
rafay-069
48 × 45 mm10 parts2LNo license0ESP32
RishiStarbie
rishigovindnair-web
94.7 × 90.4 mm7 parts2LNo license0ESP32
Half life VP
ez-pratham
127.5 × 123 mm7 parts2LNo license0ESP32
Musical alarm clock
Geofoods
90 × 48.5 mm7 parts2LNo license0ESP32
Groobie
MaheshGit31
105.1 × 89.1 mm7 parts2LNo license0- schematic only · 18 partsESP32
Cubbies
benoit-bremaud
18 partsMIT0 - schematic only · 1 partsESP32
Starbie
ahmadjamal789
1 partsNo license0 - schematic only · 1 partsESP32
Starbie jamal789
ahmadjamal789
1 partsNo license0 ESP32
Table display
yeyintlwin
59 × 29 mm42 parts2LMIT0ESP32
Fountain
extsui
100 × 86.6 mm14 parts2LMIT0
How designs wire the XIAO-ESP32-C3
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the XIAO-ESP32-C3 connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3_OUT_12 pin is tied to 3.3V on 10 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D1_2pin 2 | Connected to: DHT11 27% |
|
| D6_7pin 7 | Connected to: Signal 55% · not connected 45% |
|
| D7_8pin 8 | Connected to: Signal 64% · not connected 36% |
|
| 3V3_OUT_12pin 12 | Connected to: 3.3V 91% | — |
| GND_13pin 13 | Connected to: GND 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Usb c charge controller by cLLeB, Esp32 turd scooter controller by d0ng3o, Buom c3-eco by ekt0810 and Fountain by extsui.
The XIAO-ESP32-C3 in open source designs
The gallery holds 14 open source boards using the XIAO-ESP32-C3 from 14 GitHub repositories; a typical one measures about 90 × 61.2 mm and carries around 12 components.
100% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Table display by yeyintlwin.
Parts used alongside the XIAO-ESP32-C3
Microcontrollers on boards using the XIAO-ESP32-C3
What boards using the XIAO-ESP32-C3 are built for
XIAO-ESP32-C3: common questions
Where can I find a XIAO-ESP32-C3 reference design?
Each of the 14 boards on this page is a real design using the XIAO-ESP32-C3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the XIAO-ESP32-C3 3V3_OUT_12 pin connected?
The 3V3_OUT_12 pin is tied to 3.3V on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the XIAO-ESP32-C3.
Which microcontrollers do boards using the XIAO-ESP32-C3 use?
Most are built on ESP32 (13).
How big is a typical board using the XIAO-ESP32-C3?
The median is 90 × 61.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the XIAO-ESP32-C3?
By GitHub stars, Table display by yeyintlwin, with 0 stars.
Can I simulate one of these boards using the XIAO-ESP32-C3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.