HardLabs

Hackboard

AdamTuraj·Hackboard

Hackboard PCB layout, top view — open source STM32 board by AdamTuraj
Simulate this board

About the Hackboard PCB

Hackboard is an open source STM32 PCB design by AdamTuraj, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 101 × 53.3 mm, with 60 components from 35 distinct parts.

Its main chip is the STM32L476RGT6, from the STM32 family. Other key parts include the AP7361C-33E-13, AP63205WU-7 and USBLC6-2SC6. By type, the board carries 20 capacitors, 14 resistors, 8 connectors, 6 diodes, 4 ICs and 2 transistors.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

An extended Arduino Uno clone based on the STM32L476RG

Every hardware hacker needs a development board. So why not make your own overkill one?

The Hackboard is a "one board fits (almost) all" development board with many useful features to ensure it works with all projects! Whether you need to drive a motor, listen through a microphone, play music on a speaker or use various peripherals, the Hackboard has you covered.

Hackboard, from the project README
From the project README

Main components on the Hackboard

AP7361C-33E-13AP63205WU-7STM32L476RGT6USBLC6-2SC6

Hackboard bill of materials (BOM)

60 components, 35 distinct parts.

QtyPartRefs
1
AP7361C-33E-13
AP7361C-33E
U1
1
AP63205WU-7
U2
1
STM32L476RGT6
U3
1
USBLC6-2SC6
U7
2
PMV40UN2R
PSMN041
Q1, Q2
1
RH100-48.000-8-F-1015-EXT-TR
48MHz
Y1
1
PPTC241LFBN-RC
Conn_01x24
J1
1
MSD-1-A
Micro_SD_Card
J2
1
PPPC101LFBN-RC
Conn_01x10
J3
1
61300811821
Conn_01x08
J4
1
Conn_02x02_Counter_Clockwise
J5
1
GSB1C411111DS1HR
USB_C_Receptacle_USB2.0_16P
J6
1
PJ-002AH
Barrel_Jack_Switch
J7
1
61302011821
Conn_01x20
J8
2
PPPC022LFBN-RC
Jumper_2_Bridged
JP1, JP2
1
PTS645SK43SMTR92 LFS
SW_SPST
SW1
2
LTST-C190GKT
LED
D1, D3
1
LTST-C190TBKT
LED
D2
1
LTST-C191KRKT
LED
D4
2
SSB44-E3/52T
D_Schottky
D5, D6
Show 15 more
QtyPartRefs
1
BLM18AG601SN1D
600R@100MHz
FB1
1
IFSC1515AHER2R2M01
2.2uH
L1
1
CL31A106KBHNNNE
10uF
C1
5
CC0603KRX7R7BB105
1uF
C2, C4, C5, C15, C16
8
GCM188R71H104KA57D
0.1uF
C3, C6, C7, C8, C10, C13, C17, C18
1
AP7361-33E-13
4.7uF
C9
2
C1608X5R1A226M080AC
22uF
C11, C12
1
0603B103K500CT
10nF
C14
2
0603N100J500CT
10pF
C19, C20
2
RMCF0603JT10K0
10k
R1, R8
1
ERJ-3EKF1003V
100k
R2
4
CRGCQ0603J220R
240R
R3, R4, R5, R6
1
CRGCQ0603J220R
220R
R9
2
RC0603FR-075K1L
5k1
R12, R13
4
RT0603BRD0750KL
50k
R17, R18, R19, R20

Hackboard design files

The KiCad project lives in the AdamTuraj/Hackboard repository on GitHub; these links point at the commit this page was built from.

Hackboard: common questions

What microcontroller does the Hackboard use?

The Hackboard is built around the STM32L476RGT6, from the STM32 family.

How big is the Hackboard PCB?

The Hackboard measures 101 × 53.3 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Hackboard?

60 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hackboard design files?

From the AdamTuraj/Hackboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hackboard design in my own project?

Yes, under the terms of its GPL-3.0 license, which AdamTuraj chose for the repository.

Can I test firmware for the Hackboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards