24 open source boards using the AP7361C-33E-13

Real designs built with the AP7361C-33E-13, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the AP7361C-33E-13

Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the AP7361C-33E-13 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 18 of 22 designs, most often 10 µF (then 100 nF).
  • The VO pin has a decoupling capacitor on 18 of 22 designs, most often 10 µF (then 100 nF).
VIpin 1Connected to: 5V 77% · a signal 18%
  • Decoupling capacitor on 82% · 10 µF (14), 100 nF (4), 1 µF (4)
GNDpin 2, 4Connected to: GND 90%
VOpin 3Connected to: 3.3V 91%
  • Decoupling capacitor on 82% · 10 µF (10), 100 nF (6), 4.7 µF (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ossc pcb by marqs85, DroneController by FPV-Drone-STM32F411, Duet3 MB by Duet3D and Min evolver by FYNCH-BIO.

The AP7361C-33E-13 in open source designs

The gallery holds 24 open source boards using the AP7361C-33E-13 from 22 GitHub repositories; a typical one measures about 105.1 × 80.2 mm and carries around 97 components.

71% use four copper layers or more, and 21% carry an open source license.

The most starred is Ossc pcb by marqs85.

Microcontrollers on boards using the AP7361C-33E-13

AP7361C-33E-13: common questions

Where can I find a AP7361C-33E-13 reference design?

Each of the 24 boards on this page is a real design using the AP7361C-33E-13. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AP7361C-33E-13 VI pin?

The VI pin has a decoupling capacitor on 18 of 22 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 22 open source designs using the AP7361C-33E-13.

What decoupling capacitors do designs use on the AP7361C-33E-13 VO pin?

The VO pin has a decoupling capacitor on 18 of 22 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 22 open source designs using the AP7361C-33E-13.

What parts are used alongside the AP7361C-33E-13?

The USBLC6-2SC6, 74HCT2G34GW,125, 74LVC2G34GW,125, AP22816AKEWT and CM1624−08DE appear in the most repositories here.

Which microcontrollers do boards using the AP7361C-33E-13 use?

Most are built on ESP32 (5), Microchip SAM (5), STM32 (4) and RP2040/RP2350 (3).

How big is a typical board using the AP7361C-33E-13?

The median is 105.1 × 80.2 mm, and 29% are two-layer designs.

What is the most popular open source board using the AP7361C-33E-13?

By GitHub stars, Ossc pcb by marqs85, with 162 stars.

Can I simulate one of these boards using the AP7361C-33E-13 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part