USB-C-PD-Board
ADITHYANWUU2·USB-C-PD-Board
About the USB-C-PD-Board
USB-C-PD-Board is an open source PCB design by ADITHYANWUU2, published on GitHub under the MIT license. It is a 2-layer board measuring 40 × 30 mm, with 11 components from 10 distinct parts.
Other key parts include the HUSB238. By type, the board carries 3 connectors, 3 capacitors, 3 resistors, 1 IC and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
USB-C Power Delivery PCB interface designed in KiCad with HUSB238 PD controller
A compact USB Type-C Power Delivery sink board designed in KiCad, built around the HUSB238 PD controller IC. This board negotiates USB PD voltage profiles (5V / 9V / 12V / 15V / 20V) from any USB-C PD charger and outputs selectable DC power through a screw terminal.
- USB-C PD Negotiation — Supports USB PD 2.0/3.0, auto-negotiates up to 20V / 5A (100W) - HUSB238 Controller — Standalone PD sink IC, no firmware required - Voltage Selection — Selectable via I²C or hardware pins (VSEL0/VSEL1) - I²C Interface — 4-pin header for external MCU control and voltage readback - Power LED Indicator —…
Main components on the USB-C-PD-Board
USB-C-PD-Board bill of materials (BOM)
11 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HUSB238 | DFN-10-1EP_3x3mm_P0.5mm | U1 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_GCT_USB4105 | J1 |
| 1 | VOUT/GND | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | I2C_Header | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Green | LED_0603_1608Metric | D1 |
| 1 | 10UF/25V 10uF/25V | C_0805_2012Metric | C1 |
| 1 | 100NF 100nF | C_0402_1005Metric | C2 |
| 1 | 22UF/25V 22uF/25V | C_1206_3216Metric | C3 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R1, R2 |
| 1 | 1k | R_0402_1005Metric | R3 |
USB-C-PD-Board design files
The KiCad project lives in the ADITHYANWUU2/USB-C-PD-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutUSB-C-PD-Board.kicad_pcb
- SchematicUSB-C-PD-Board.kicad_sch
- BOMBOM.csv
USB-C-PD-Board: common questions
How big is the USB-C-PD-Board?
The USB-C-PD-Board measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-C-PD-Board?
11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-C-PD-Board design files?
From the ADITHYANWUU2/USB-C-PD-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-C-PD-Board design in my own project?
Yes, under the terms of its MIT license, which ADITHYANWUU2 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k