STM32-Custom

Adityasc9·STM32-Custom-PCB

STM32-Custom PCB layout, top view — open source STM32 board by Adityasc9

About the STM32-Custom PCB

STM32-Custom is an open source STM32 PCB design by Adityasc9, published on GitHub. It is a 2-layer board measuring 43 × 33 mm, with 31 components from 20 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3, USBLC6-2SC6 and BME280. By type, the board carries 14 capacitors, 7 resistors, 4 ICs, 1 crystal, 1 connector and 1 switch.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design files for a custom STM32 development board created in KiCad.

Main components on the STM32-Custom

STM32-Custom bill of materials (BOM)

31 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103C8T6
U1
1
AMS1117-3.3
U2
1
USBLC6-2SC6
U3
1
BME280
U4
1
16MHZ
16MHz
Y1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x04_Pin
I2C
1
SW_SPDT
SW1
1
LED
D1
1
FerriteBead
FB1
5
100N
100n
C1, C2, C3, C4, C9
1
10U
10u
C5
1
10N
10n
C6
2
1u
C7, C8
2
10P
10p
C10, C11
2
22U
22u
C12, C13
1
0.1u
C14
2
10K
10k
R1, R8
2
5K1
5k1
R2, R3
3
1K5
1k5
R5, R6, R7

STM32-Custom design files

The KiCad project lives in the Adityasc9/STM32-Custom-PCB repository on GitHub; these links point at the commit this page was built from.

STM32-Custom: common questions

What microcontroller does the STM32-Custom use?

The STM32-Custom is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32-Custom PCB?

The STM32-Custom measures 43 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-Custom?

31 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32-Custom design files?

From the Adityasc9/STM32-Custom-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32-Custom design in my own project?

The repository has no license, so all rights stay with Adityasc9. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-Custom without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards