HardLabs

Kicad project

adixit-03·kicad_project

Kicad project PCB layout, top view — open source AVR/Arduino board by adixit-03

About the Kicad project PCB

Kicad project is an open source AVR/Arduino PCB design by adixit-03, published on GitHub. It is a 2-layer board measuring 47.6 × 30.5 mm, with 25 components from 16 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the 24LC1025 and DS1337S_. By type, the board carries 7 resistors, 5 capacitors, 4 ICs, 4 connectors, 2 crystals and 2 diodes.

Main components on the Kicad project

24LC1025DS1337S_ATMEGA328P-AU

Kicad project bill of materials (BOM)

25 components, 16 distinct parts.

QtyPartRefs
2
24LC1025
U1, U2
1
DS1337S_
U3
1
ATMEGA328P-AU
U4
1
32.768 KHz
Y1
1
16 MHz
Y2
2
Conn_01x04_Pin
J1, J2
1
Conn_01x09_Pin
J3
1
Conn_02x03_Odd_Even
J4
1
Battery
BT1
2
LED
D1, D2
2
0.1uF
C1, C4
2
22pF
C2, C3
1
100 nF
C5
3
10K
R1, R2, R6
2
4.7K
R3, R4
2
330
R5, R7

Kicad project design files

The KiCad project lives in the adixit-03/kicad_project repository on GitHub; these links point at the commit this page was built from.

Kicad project: common questions

What microcontroller does the Kicad project use?

The Kicad project is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the Kicad project PCB?

The Kicad project measures 47.6 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kicad project?

25 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad project design files?

From the adixit-03/kicad_project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kicad project design in my own project?

The repository has no license, so all rights stay with adixit-03. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kicad project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards