Cartesian ppp ros
adnksharp·cartesian-ppp-ros·electronic/electronic.kicad_pcb
About the Cartesian ppp ros PCB
Cartesian ppp ros is an open source ESP32 PCB design by adnksharp, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68.5 × 75 mm, with 17 components from 9 distinct parts.
Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. By type, the board carries 8 connectors, 4 diodes, 4 resistors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
Robot cartesiano de 3 DOF
El proyecto se desarrolló usando KiCAD. (electronic.kicad_pro) se desarrollo para conectar una placa de ESP32 con 2 controladores de motores L298 y encoders de 3 motores JGA25-371. Los componentes utilizados en el proyecto son:
1 ESP32 S3 WROOM 1 N16R8 DevKit 2 Modulos controladores de motores L298 3 Motores con encoder JGA25-371 4 LEDs 4 Resistencias 220 $\Omega$ 1 Fuente de alimentación 12V 2A
Main components on the Cartesian ppp ros
Cartesian ppp ros bill of materials (BOM)
17 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DevKitC | ESP32-S3-DevKitC | U1 |
| 1 | POWER SUPLY | BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | ENC01 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | ENC02 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | ENC03 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 2 | Conn_01x05 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J25, J28 |
| 2 | Screw_Terminal_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J29, J30 |
| 4 | LED | LED_Yuji_5730 | D19, D20, D21, D22 |
| 4 | 220 | R_1206_3216Metric | R3, R4, R5, R6 |
Cartesian ppp ros design files
The KiCad project lives in the adnksharp/cartesian-ppp-ros repository on GitHub; these links point at the commit this page was built from.
Cartesian ppp ros: common questions
What microcontroller does the Cartesian ppp ros use?
The Cartesian ppp ros is built around the ESP32-S3-DevKitC, from the ESP32 family.
How big is the Cartesian ppp ros PCB?
The Cartesian ppp ros measures 68.5 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cartesian ppp ros?
17 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cartesian ppp ros design files?
From the adnksharp/cartesian-ppp-ros repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cartesian ppp ros design in my own project?
Yes, under the terms of its GPL-3.0 license, which adnksharp chose for the repository.
Can I test firmware for the Cartesian ppp ros without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k