69 open source boards using the ESP32-S3-DevKitC
Real designs built with the ESP32-S3-DevKitC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Mem esp
fread
134.6 × 49.5 mm70 parts2LNo license7ESP32
KaSe
mornepousse
296.8 × 145 mm155 parts2LNo license4ESP32
WiFi Radio Project
Minall13
111 × 69 mm9 parts2LCC-BY-NC-4.04ESP32
ESP32-DevKitC3-Simple-Thermostat
jrtaylor71
133 × 89.5 mm32 parts4LNo license2ESP32
Esp32io hw
noritama-lab
110 × 100 mm85 parts2LNo license1ESP32
Smart air
meeTeam05
100 × 100 mm62 parts2LMIT1ESP32
PCBbot
halherta
140 × 120 mm60 parts2LMIT1ESP32
Robotics-Stepper-Controller
Jyst7
95.3 × 84.7 mm57 parts2LMIT1ESP32
Attention-Seeker
M-Mrk
91 × 80.5 mm19 parts2LApache-2.01ESP32
BMS-monitor hw
KimBP
98 × 56.3 mm14 parts2LNo license1ESP32
Legacy-VCM
byui-formula-hybrid
92 × 72 mm14 parts2LMIT1ESP32
SMACAR MAIN BOARD
Camsu04
60.5 × 72.5 mm11 parts2LMIT1ESP32
ChrisKeyboards
MagicTINTIN
49.6 × 26.7 mm8 parts2LGPL-3.01- schematic only · 17 partsESP32
Click clack
adamf
17 partsMIT1 ESP32
Pet climate control
Yuan-Quan
217.2 × 95.3 mm218 parts2LNo license0ESP32
Esp32 patch bay circuit
james-l-key
165 × 119.5 mm187 parts4LMIT0ESP32
Custom keyboard
GuySabban
335.4 × 118.1 mm169 parts2LNo license0ESP32
KaSe
mornepousse
168.6 × 140.4 mm143 parts2LNo license0ESP32
PA-Sequencer-Hardware
brokebit
152.4 × 94 mm115 parts6LNo license0ESP32
Tas5805m mux board
cbaurtx
99.1 × 99.1 mm96 parts4LCERN-OHL-W-2.00ESP32
Rotator-ESP32-S3-Board
brokebit
110.9 × 93 mm79 parts6LNo license0ESP32
WoMoHome
Sharki-66
138 × 76 mm74 parts2LMIT0ESP32
Blockchain iot
meeTeam05
100 × 100 mm62 parts2LMIT0ESP32
Embedded-System-Project
jastikai
125.2 × 86.4 mm57 parts2LNo license0ESP32
MainBoardV3.1FormB
Unimakers
120 × 120 mm51 parts4LNo license0ESP32
Driver Control
Monash-Railway-Express
132.7 × 121.4 mm40 parts4LNo license0ESP32
Custom-Mixer-ESP32
3aks
192.3 × 121.2 mm39 parts2LMIT0ESP32
Curupira diy
acacio90
100 × 100 mm31 parts2LNo license0ESP32
MeatLoaf-Hardware-ClausS
LeshanDaFo
63.7 × 73 mm30 parts2LCustom license0ESP32
Wheel Drive
chuahengli
130 × 105 mm24 parts2LNo license0ESP32
Wheel Drive
lnpanini
130 × 105 mm24 parts2LNo license0ESP32
Shlok EnC Inductions
Shlol762
96.5 × 93 mm23 parts2LNo license0ESP32
Unplugged djsce
nishumbh
92.5 × 61.5 mm22 parts2LNo license0ESP32
Pioneer3dx ROS2
AvansMechatronica
130 × 80 mm20 parts2LCustom license0ESP32
LibreHealth-Lift
Mallo321123
97 × 67 mm18 parts2LGPL-3.00ESP32
Cartesian ppp ros
adnksharp
68.5 × 75 mm17 parts2LGPL-3.00
How designs wire the ESP32-S3-DevKitC
Read from the KiCad layouts of 51 open source designs, one per repository: what each pin of the ESP32-S3-DevKitC connects to, and the resistors, capacitors and other passives placed on it.
- The CHIP_PU pin is left unconnected on 45 of 51 designs (a signal on 5).
- The GPIO20/USB_D+ pin is left unconnected on 43 of 50 designs (a signal on 7).
- The GPIO19/USB_D- pin is left unconnected on 42 of 50 designs (a signal on 8).
- The GPIO44/U0RXD pin is left unconnected on 41 of 50 designs (a signal on 9).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1, 2 | Connected to: 3.3V 73% | — |
| CHIP_PUpin 3 | Connected to: Not connected 88% | — |
| GPIO3/ADC1_CH2pin 13 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO46pin 14 | Connected to: Not connected 76% · a signal 24% | — |
| 5Vpin 21 | Connected to: 5V 70% · not connected 26% | — |
| GNDpin 22, 23, 24, 44 | Connected to: GND 91% | — |
| GPIO19/USB_D-pin 25 | Connected to: Not connected 84% · a signal 16% | — |
| GPIO20/USB_D+pin 26 | Connected to: Not connected 86% | — |
| GPIO45pin 30 | Connected to: Not connected 68% · a signal 32% | — |
| GPIO0pin 31 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO35pin 32 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO37pin 34 | Connected to: Not connected 64% · a signal 36% | — |
| GPIO44/U0RXDpin 42 | Connected to: Not connected 82% · a signal 18% | — |
| GPIO43/U0TXDpin 43 | Connected to: Not connected 82% · a signal 16% | — |
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Easyduino ESP32S3 by Hanqaqa, IMU-RC Car Board by DimitriOnLSD, Mem esp by fread and SensactHs modular esp32 by klaus-liebler.
The ESP32-S3-DevKitC in open source designs
The gallery holds 69 open source boards using the ESP32-S3-DevKitC from 54 GitHub repositories; a typical one measures about 100 × 92.3 mm and carries around 27 components.
78% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.
The most starred is Easyduino ESP32S3 by Hanqaqa.
Parts used alongside the ESP32-S3-DevKitC
Microcontrollers on boards using the ESP32-S3-DevKitC
What boards using the ESP32-S3-DevKitC are built for
ESP32-S3-DevKitC: common questions
Where can I find a ESP32-S3-DevKitC reference design?
Each of the 69 boards on this page is a real design using the ESP32-S3-DevKitC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-S3-DevKitC CHIP_PU pin connected?
The CHIP_PU pin is left unconnected on 45 of 51 designs (a signal on 5). Counted from the KiCad layouts of 51 open source designs using the ESP32-S3-DevKitC.
How is the ESP32-S3-DevKitC GPIO20/USB_D+ pin connected?
The GPIO20/USB_D+ pin is left unconnected on 43 of 50 designs (a signal on 7). Counted from the KiCad layouts of 51 open source designs using the ESP32-S3-DevKitC.
How is the ESP32-S3-DevKitC GPIO19/USB_D- pin connected?
The GPIO19/USB_D- pin is left unconnected on 42 of 50 designs (a signal on 8). Counted from the KiCad layouts of 51 open source designs using the ESP32-S3-DevKitC.
What parts are used alongside the ESP32-S3-DevKitC?
The AMS1117-3.3, AMS1117, AMS1117-3.3_C347222, BQ25611D and C5605 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-S3-DevKitC use?
Most are built on ESP32 (69).
How big is a typical board using the ESP32-S3-DevKitC?
The median is 100 × 92.3 mm, and 78% are two-layer designs.
What is the most popular open source board using the ESP32-S3-DevKitC?
By GitHub stars, Easyduino ESP32S3 by Hanqaqa, with 754 stars.
Can I simulate one of these boards using the ESP32-S3-DevKitC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.