Retro535
adsdevdoo·retro535·hardware/retro535.kicad_pcb
About the Retro535 PCB
Retro535 is an open source PCB design by adsdevdoo, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 68 components from 36 distinct parts.
Other key parts include the SAB80535-N, SN74HCT573DWR, SST39SF010A-70-4C-PHE, AS6C62256A-70PCN and FT232RL. By type, the board carries 23 resistors, 20 capacitors, 8 ICs, 7 connectors, 3 diodes and 2 jumpers.
It belongs with the retro computing designs in this gallery.
From the project
Siemens SAB80535-N Retro Development Board v1.0 — плата 100 × 80 мм, два слоя, съёмный SAB80535-N в THT-панели PLCC-68, 64 КиБ доступного CODE во внешней Flash и отдельные 32 КиБ SRAM. Питание USB-C; FT232RL UART, RESET, пользовательский LED P4.0, разъёмы GPIO/аналоговых входов/ш
Siemens SAB80535-N Retro Development Board v1.0 — плата 100 × 80 мм, два слоя, съёмный SAB80535-N в THT-панели PLCC-68, 64 КиБ доступного CODE во внешней Flash и отдельные 32 КиБ SRAM. Питание USB-C; FT232RL UART, RESET, пользовательский LED P4.0, разъёмы GPIO/аналоговых входов/шины.
Статус: инженерный прототип, не испытан в железе. Производственный архив для первой пробной партии — fabrication/retro535-v1.0-jlcpcb.zip. Контрольные результаты и границы проверки — reports/release-review.md. Покупку, загрузку файлов и заказ в JLCPCB выполняет владелец платы.

Main components on the Retro535
Retro535 bill of materials (BOM)
68 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SAB80535-N | PLCC68_PreciDip_540-99-068-24-000-1 | U1 |
| 1 | SN74HCT573DWR 74HCT573 | SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | SST39SF010A-70-4C-PHE | DIP-32_W15.24mm_Socket_LongPads | U3 |
| 1 | AS6C62256A-70PCN | DIP-28_W15.24mm_Socket_LongPads | U4 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U5 |
| 1 | TPS2041BDR | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MCP120-475I/SN | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | SN74AHCT125DR 74AHCT125 | SOIC-14_3.9x8.7mm_P1.27mm | U8 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | ECS-110.5-20-4X 11.0592MHz CL20p | Crystal_HC49-U_Vertical | Y1 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | M20-9980546 P1 | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | M20-9980546 P4 | PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | M20-9980546 P5 | PinHeader_2x05_P2.54mm_Vertical | J4 |
| 1 | M20-9980546 ANALOG | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | M20-9980446 P3 / UART | PinHeader_2x04_P2.54mm_Vertical | J6 |
| 1 | M20-9981546 BUS RESERVED | PinHeader_2x15_P2.54mm_Vertical | J7 |
| 1 | MF-MSMF075-2 0.75A PTC | Fuse_1812_4532Metric | F1 |
| 1 | M20-9990245 RUN - FIT AFTER FT_PROG | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | M20-9990245 USB RX LINK | PinHeader_1x02_P2.54mm_Vertical | JP2 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B3F-1000 RESET | SW_PUSH_6mm | SW1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | D1 |
| 1 | LTST-C170KGKT POWER green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LTST-C170KRKT USER P4.0 active LOW | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | BLM21PG601SN1D 600R@100MHz | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 2 | GRM21BR61C475KA73L 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C7 |
| 14 | GRM21BR71H104KA01L 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C6, C8, C9, C12 +6 |
| 2 | GRM2165C1H300JA01D 30p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 2 | GRM21BR71C105KA01L 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C16 |
| 2 | RC0805FR-075K1L 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 7 | RC0805FR-0710KL 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R7, R9, R10, R12 |
| 1 | RC0805FR-072K2L 2.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | RC0805FR-0710RL 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | RC0805FR-0747KL 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 10 | RC0805FR-07100KL 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R15, R20, R21, R22, R23, R24, R25 +2 |
| 1 | RC0805FR-073K3L 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
Retro535 design files
The KiCad project lives in the adsdevdoo/retro535 repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/retro535.kicad_pcb
- Schematichardware/retro535.kicad_sch
Retro535: common questions
How big is the Retro535 PCB?
The Retro535 measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Retro535?
68 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Retro535 design files?
From the adsdevdoo/retro535 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Retro535 design in my own project?
The repository has no license, so all rights stay with adsdevdoo. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k