10 open source boards using the SN74AHCT125DR

Real designs built with the SN74AHCT125DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the SN74AHCT125DR

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the SN74AHCT125DR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 1 µF).
  • The 1OE pin is tied to GND on 6 of 10 designs (a signal on 4).
  • The 2OE pin is tied to GND on 6 of 10 designs (not connected on 2, a signal on 2).
1OEpin 1Connected to: GND 60% · a signal 40%
  • Pull-up to 5V on 30% · 10 kΩ (2), 1 kΩ (1)
1Ypin 3Connected to: A connector 20%
  • Series resistor on 30% · 100 Ω (2), 33 Ω (1)
2OEpin 4Connected to: GND 60% · not connected 20% · a signal 20%
2Apin 5Connected to: A connector 50%, the microcontroller 30% · not connected 20%
  • Resistor to GND on 30% · 4.7 kΩ (2), 100 kΩ (1)
GNDpin 7Connected to: GND 90%
3Ypin 8Connected to: A connector 20% · not connected 40%
  • Series resistor on 30% · 100 Ω (2), 33 Ω (1)
4Ypin 11Connected to: A connector 20% · not connected 40%
  • Series resistor on 30% · 100 Ω (2), 33 Ω (1)
VCCpin 14Connected to: 5V 90%
  • Decoupling capacitor on 80% · 100 nF (7), 1 µF (1), 1 mF (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Management by dennisss, Mcu board by FutureSharks, DeskMixer by RaduAndre and Retro535 by adsdevdoo.

The SN74AHCT125DR in open source designs

The gallery holds 10 open source boards using the SN74AHCT125DR from 10 GitHub repositories; a typical one measures about 105.5 × 67.8 mm and carries around 62 components.

90% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is Management by dennisss.

Microcontrollers on boards using the SN74AHCT125DR

What boards using the SN74AHCT125DR are built for

SN74AHCT125DR: common questions

Where can I find a SN74AHCT125DR reference design?

Each of the 10 boards on this page is a real design using the SN74AHCT125DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74AHCT125DR VCC pin?

The VCC pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the SN74AHCT125DR.

How is the SN74AHCT125DR 1OE pin connected?

The 1OE pin is tied to GND on 6 of 10 designs (a signal on 4). Counted from the KiCad layouts of 10 open source designs using the SN74AHCT125DR.

How is the SN74AHCT125DR 2OE pin connected?

The 2OE pin is tied to GND on 6 of 10 designs (not connected on 2, a signal on 2). Counted from the KiCad layouts of 10 open source designs using the SN74AHCT125DR.

Which microcontrollers do boards using the SN74AHCT125DR use?

Most are built on ESP32 (3), Nordic nRF (1) and STM32 (1).

How big is a typical board using the SN74AHCT125DR?

The median is 105.5 × 67.8 mm, and 90% are two-layer designs.

What is the most popular open source board using the SN74AHCT125DR?

By GitHub stars, Management by dennisss, with 381 stars.

Can I simulate one of these boards using the SN74AHCT125DR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part