PancakeCNC
aerolicavoli·PancakeCNC·ControllerPCB/ControllerPCB.kicad_pcb
About the PancakeCNC PCB
PancakeCNC is an open source ESP32 PCB design by aerolicavoli, published on GitHub. It is a 4-layer board measuring 57 × 85 mm, with 39 components from 21 distinct parts.
Its main chip is the ESP32-S3-WROOM-2, from the ESP32 family. Other key parts include the AMS1117-3.3, LM1084-5.0 and TMP236A4DCKR. By type, the board carries 9 resistors, 8 diodes, 8 capacitors, 7 connectors, 5 ICs and 2 switches.
It belongs with the robotics & motion designs in this gallery.
From the project
Source and designs intended to print a pancake
A fully custom, pancake-printing CNC platform. This repository collects the mechanical CAD, controller electronics, firmware, ground station tooling, and reference simulations that work together to lay down batter in precise paths.
The printable CAD for the hinges and pump assembly is currently tracked outside this repository; the focus here is on the control stack that drives the mechanism.
Main components on the PancakeCNC
PancakeCNC bill of materials (BOM)
39 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-S3-WROOM-2 | ESP32-S3-WROOM-2 | U2 |
| 1 | LM1084-5.0 | TO-263-3_TabPin2 | U3 |
| 1 | TMP236A4DCKR | SOT-353_SC-70-5_Handsoldering | U5 |
| 1 | ~ | TSSOP-14-1EP_4.4x5mm_P0.65mm | U6 |
| 1 | USB_B_Micro | USB_Micro-AB_Molex_47590-0001 | J1 |
| 1 | A-DF 09 A/KG-T4S | MyDSUBASSMANN_A-DF_09_A_KG-T4S | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J3 |
| 1 | MotorDriverSocket | 10JQ-BT_JST | J4 |
| 1 | UISocket | 10JQ-BT_JST | J5 |
| 1 | Pi JST | JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J6 |
| 1 | Conn_02x02_Row_Letter_First | PinSocket_2x02_P2.54mm_Vertical | J7 |
| 2 | SW_Push_Dual_x2 | SMT_FS | SW1, SW2 |
| 5 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D5, D7 Limit 1, D8 Limit 0 |
| 2 | D_TVS | D_SOD-323_HandSoldering | D3, D4 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D6 |
| 5 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C6, C8 |
| 3 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C7 |
| 1 | 7.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 4 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9, R10, R11 |
PancakeCNC design files
The KiCad project lives in the aerolicavoli/PancakeCNC repository on GitHub; these links point at the commit this page was built from.
PancakeCNC: common questions
What microcontroller does the PancakeCNC use?
The PancakeCNC is built around the ESP32-S3-WROOM-2, from the ESP32 family.
How big is the PancakeCNC PCB?
The PancakeCNC measures 57 × 85 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PancakeCNC?
39 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the PancakeCNC design files?
From the aerolicavoli/PancakeCNC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PancakeCNC design in my own project?
The repository has no license, so all rights stay with aerolicavoli. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PancakeCNC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k