HardLabs

Aerolinkers hw

aerolinkers·aerolinkers-hw

Aerolinkers hw PCB layout, top view — open source Nordic nRF board by aerolinkers

About the Aerolinkers hw PCB

Aerolinkers hw is an open source Nordic nRF PCB design by aerolinkers, published on GitHub. It is a 4-layer board measuring 36 × 36 mm, with 105 components from 37 distinct parts.

Its main chip is the NRF5340-QKAA-AB0-R, from the Nordic nRF family. Other key parts include the NPM1300-QEAA-R7, TPS76201, DRV2603, LSM6DSOX and REG710NA-3.3/250. By type, the board carries 65 capacitors, 15 resistors, 9 ICs, 6 connectors, 6 inductors and 3 crystals.

It belongs with the iot & wireless, audio and sensors designs in this gallery.

From the project

AeroLinkers Hardware (PoC_V1) is a modular IoT hardware platform built around the nRF5340 microcontroller, integrating Wi-Fi connectivity, sensors, audio, haptic feedback, and display support. Designed with efficient power management and a scalable architecture, it enables real-time data processing, wireless communication, and user interaction, mak

The system integrates: - Microcontroller (Nordic nRF series) - Wi-Fi module - Power management system (PMIC + LDO) - IMU sensor - Audio subsystem - Haptic driver - Display interface

Main components on the Aerolinkers hw

NPM1300-QEAA-R7TPS76201DRV2603LSM6DSOXREG710NA-3.3/250SGTL5000NRF5340-QKAA-AB0-RNRF7002-QFAA-RDPX1608LKF3R2460AACA-5036-A2-CC-S - 2.4 GHz

Aerolinkers hw bill of materials (BOM)

105 components, 37 distinct parts.

QtyPartRefs
1
NPM1300-QEAA-R7
U1
1
TPS76201
U2
1
DRV2603
U3
1
LSM6DSOX
U4
1
REG710NA-3.3/250
U5
1
SGTL5000
U6
1
NRF5340-QKAA-AB0-R
U7
1
NRF7002-QFAA-R
U8
1
DPX1608LKF3R2460A
U9
1
ACA-5036-A2-CC-S - 2.4 GHz
A1
1
32MHz
Y1
1
32.768 KHz
Y2
1
40 MHz
Y3
4
Conn_01x02
J1, J2, J4, J6
1
Conn_01x13
J3
1
Conn_01x05
J5
2
2.2uH
L1, L2
2
10uH
L3, L4
1
3.3uH
L5
1
1.5nH
L6
Show 17 more
QtyPartRefs
17
1uF
C1, C2, C4, C5, C6, C12, C14, C22 +9
20
100nF
C3, C15, C16, C20, C21, C23, C24, C25 +12
6
10uF
C7, C8, C9, C10, C11, C13
6
4.7uF
C17, C19, C43, C47, C49, C58
2
0.22uF
C18, C54
1
2.2nF
C31
2
0.47uF
C44, C59
1
10nF
C46
3
2.2uF
C51, C52, C55
7
22nF
C56, C60, C61, C62, C63, C64, C65
1
270K
R1
5
100K
R2, R11, R12, R13, R14
2
10K
R3, R15
1
200K
R4
1
3K
R5
1
66.5K
R6
4
3.3K
R7, R8, R9, R10

Aerolinkers hw design files

The KiCad project lives in the aerolinkers/aerolinkers-hw repository on GitHub; these links point at the commit this page was built from.

Aerolinkers hw: common questions

What microcontroller does the Aerolinkers hw use?

The Aerolinkers hw is built around the NRF5340-QKAA-AB0-R, from the Nordic nRF family.

How big is the Aerolinkers hw PCB?

The Aerolinkers hw measures 36 × 36 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Aerolinkers hw?

105 components, from 37 distinct parts. The full bill of materials is listed on this page.

Where can I download the Aerolinkers hw design files?

From the aerolinkers/aerolinkers-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Aerolinkers hw design in my own project?

The repository has no license, so all rights stay with aerolinkers. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Aerolinkers hw without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards