8 open source boards using the LSM6DSOX

Real designs built with the LSM6DSOX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the LSM6DSOX

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LSM6DSOX connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF).
  • The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF).
  • The OCS_AUX pin is left unconnected on 6 of 7 designs.
  • The SDO_AUX pin is left unconnected on 6 of 7 designs.
VDDIOpin 5Connected to: 3.3V 71%
  • Decoupling capacitor on 71% · 100 nF (10), 1 µF (2), 4.7 µF (1)
GNDpin 6, 7Connected to: GND 86%
VDDpin 8Connected to: 3.3V 71% · a signal 29%
  • Decoupling capacitor on 71% · 100 nF (10), 4.7 µF (2), 1 µF (2)
OCS_AUXpin 10Connected to: Not connected 86%
SDO_AUXpin 11Connected to: Not connected 86%
SCLpin 13Connected to: A connector 29%, the microcontroller 29%
  • Series resistor on 71% · 0 Ω (3), 2.2 kΩ (1), 3.3 kΩ (1)
SDApin 14Connected to: A connector 29%, the microcontroller 29%
  • Series resistor on 71% · 0 Ω (3), 2.2 kΩ (1), 3.3 kΩ (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SparkFun XRP Controller by sparkfun, Aerolinkers hw by aerolinkers, PROJ500 - Auxillary IMU Board by AislingBee and Adafruit LSM6DSOX by dcuccia.

The LSM6DSOX in open source designs

The gallery holds 8 open source boards using the LSM6DSOX from 7 GitHub repositories; a typical one measures about 49.8 × 43.7 mm and carries around 71 components.

50% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is SparkFun XRP Controller by sparkfun.

Parts used alongside the LSM6DSOX

Microcontrollers on boards using the LSM6DSOX

LSM6DSOX: common questions

Where can I find a LSM6DSOX reference design?

Each of the 8 boards on this page is a real design using the LSM6DSOX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LSM6DSOX VDDIO pin?

The VDDIO pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the LSM6DSOX.

What decoupling capacitors do designs use on the LSM6DSOX VDD pin?

The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the LSM6DSOX.

How is the LSM6DSOX OCS_AUX pin connected?

The OCS_AUX pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the LSM6DSOX.

Which microcontrollers do boards using the LSM6DSOX use?

Most are built on RP2040/RP2350 (3), ESP32 (1) and Nordic nRF (1).

How big is a typical board using the LSM6DSOX?

The median is 49.8 × 43.7 mm, and 50% are two-layer designs.

What is the most popular open source board using the LSM6DSOX?

By GitHub stars, SparkFun XRP Controller by sparkfun, with 14 stars.

Can I simulate one of these boards using the LSM6DSOX before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part