Rouse and chime
afreedma·rouse-and-chime·hardware/hardware.kicad_sch
About the Rouse and chime PCB
Rouse and chime is an open source PCB design by afreedma, published on GitHub under the CC-BY-4.0 license. It is a board, with 5 components from 5 distinct parts.
Other key parts include the L7805. By type, the board carries 2 capacitors, 1 IC and 1 resistor.
It belongs with the audio designs in this gallery.
From the project
A small regulator/adapter board that feeds a Sony BRAVIA 8's undocumented S-CENTER SPEAKER IN terminal from a line-level audio source and a 12V trigger output — stepping the trigger down to the ~5V the terminal expects.
A small regulator/adapter board that feeds a Sony BRAVIA 8's undocumented S-CENTER SPEAKER IN terminal from a line-level audio source and a 12V trigger output — stepping the trigger down to the ~5V the terminal expects.
Status: Design phase — not yet built or bench-tested. Nothing in this repo has been verified against real hardware yet.
The Sony BRAVIA 8 (K-55XR80) has an S-CENTER SPEAKER IN terminal, confirmed in Sony's official Reference Guide and Setup Guide PDFs for this model, but the terminal's electrical spec is not published by Sony. The pinout and target voltage used here are…
Main components on the Rouse and chime
Rouse and chime bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | U1 | |
| 1 | VPULSE | V1 | |
| 1 | 330n | C1 | |
| 1 | 100n | C2 | |
| 1 | 82 | R1 |
Rouse and chime design files
The KiCad project lives in the afreedma/rouse-and-chime repository on GitHub; these links point at the commit this page was built from.
- Schematichardware/hardware.kicad_sch
Rouse and chime: common questions
How many components are on the Rouse and chime?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rouse and chime design files?
From the afreedma/rouse-and-chime repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Rouse and chime design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which afreedma chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687