Interactive Core Memory Badge v0.2

ageppert·Core-64-Interactive-Core-Memory-Badge·Electronic Design/Interactive Core Memory Badge v0.2/Interactive Core Memory Badge v0.2.kicad_pcb

Interactive Core Memory Badge v0.2 PCB layout, top view — open source NXP board by ageppert

About the Interactive Core Memory Badge v0.2 PCB

Interactive Core Memory Badge v0.2 is an open source NXP PCB design by ageppert, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 81.3 × 165.1 mm, with 122 components from 49 distinct parts.

Its main chip is the Teensy-LC, from the NXP family. Other key parts include the Micro_LiPo_Charger, LM393 and A3214ELHLT-T. By type, the board carries 48 resistors, 23 transistors, 21 test points, 13 diodes, 7 capacitors and 4 ICs.

It belongs with the wearables designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

64 bits of core memory and LEDs to interact with directly using a magnetic wand.

Native KiCad files for the schematic and PCB. (KiCad Version: (5.1.2-1)-1, release build)

Main components on the Interactive Core Memory Badge v0.2

Interactive Core Memory Badge v0.2 bill of materials (BOM)

122 components, 49 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Micro_LiPo_Charger
U1
1
Teensy-LC
U2
1
LM393
U3
1
A3214ELHLT-T
U5
10
MMBT4403LT1G
Q1, Q3, Q5, Q7, Q9, Q11, Q13, Q15 +2
13
MMBT4401LT1G
Q2, Q4, Q6, Q8, Q10, Q12, Q14, Q16 +5
1
Core_Memory_8x8_Array
CM1
1
Polyfuse
F1
1
OLED_DISPLAY
H1
1
LED_Array
H2
1
SW_Reed
SW2
1
SW_DPDT_x2
SW3
1
V+USB
TP1
1
V-USB
TP2
1
+BATT
TP3
1
-BATT
TP4
1
+VSW
TP5
1
VMEM
TP6
1
CCL
TP7
1
CCH
TP8
Show 29 more
QtyPartRefs
1
GNDD
TP9
1
SENSE1
TP10
1
SENSE2
TP11
1
SENSE_OUT_A
TP12
1
SENSE_OUT_B
TP13
1
SENSE_PULSE
TP14
1
+3V3
TP15
1
WRITE_ENABLE
TP16
1
I2C_Clock
TP17
1
I2C_Data
TP18
1
LED_MATRIX
TP19
1
REED_SWITCH
TP20
1
HALL_SWITCH
TP21
6
WS2813C
BAT54AW
Worldsemi
D1, D3, D5, D7, D9, D11
6
WS2813C
BAT54CW
Worldsemi
D2, D4, D6, D8, D10, D12
1
WS2813C
S1M-13-F
Worldsemi
D13
3
CC0603KRX7R9BB104
0.1uF
Yageo
C1, C3, C5
2
CC0603KRX7R9BB104
10uF
Yageo
C2, C4
1
CC0603KRX7R9BB104
1000uF
Yageo
C6
1
CC0603KRX7R9BB104
10pF
Yageo
C7
21
470
R1, R2, R3, R4, R6, R7, R8, R9 +13
6
6R8
R5, R10, R11, R12, R15, R22
5
4K7
R28, R44, R45, R47, R48
3
1K5
R29, R32, R35
2
1K8
R30, R33
2
11
R31, R34
7
10k
R36, R37, R38, R39, R40, R41, R42
1
0.01
R43
1
300
R46

Interactive Core Memory Badge v0.2 design files

The KiCad project lives in the ageppert/Core-64-Interactive-Core-Memory-Badge repository on GitHub; these links point at the commit this page was built from.

Interactive Core Memory Badge v0.2: common questions

What microcontroller does the Interactive Core Memory Badge v0.2 use?

The Interactive Core Memory Badge v0.2 is built around the Teensy-LC, from the NXP family.

How big is the Interactive Core Memory Badge v0.2 PCB?

The Interactive Core Memory Badge v0.2 measures 81.3 × 165.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Interactive Core Memory Badge v0.2?

122 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Interactive Core Memory Badge v0.2 design files?

From the ageppert/Core-64-Interactive-Core-Memory-Badge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Interactive Core Memory Badge v0.2 design in my own project?

Yes, under the terms of its GPL-3.0 license, which ageppert chose for the repository.

Can I test firmware for the Interactive Core Memory Badge v0.2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Core-64-Interactive-Core-Memory-Badge

Earlier revisions in the repo: Interactive Core Memory Badge v0.1

Similar boards