12 open source boards using the Teensy-LC

Real designs built with the Teensy-LC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the Teensy-LC

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the Teensy-LC connects to, and the resistors, capacitors and other passives placed on it.

  • The 17_VIN pin is left unconnected on 7 of 8 designs.
  • The PROGRAM pin is left unconnected on 7 of 8 designs.
  • The AREF pin is left unconnected on 7 of 7 designs.
  • The 25_A11 pin is left unconnected on 6 of 7 designs.
GNDpin 1, 17, 32Connected to: GND 70% · a signal 17%
17_VINpin 15Connected to: Not connected 88%
PROGRAMpin 18Connected to: Not connected 88%
26_A12/DACpin 19Connected to: Not connected 63% · a signal 38%
VINpin 33Connected to: 5V 71% · not connected 29%
VUSBpin 34Connected to: Not connected 71%
AREFpin 35Connected to: Not connected 100%
24_A10pin 36Connected to: Not connected 71% · a signal 29%
25_A11pin 37Connected to: Not connected 86%
Pin 38Connected to: Not connected 100%
Pin 39Connected to: Not connected 75% · a signal 25%
Pin 40Connected to: Not connected 75% · a signal 25%
Pin 52Connected to: Not connected 100%

25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Interactive Core Memory Badge (Logic) v0.3 by ageppert, Dial-MVP2 by borgel, ArduSynth by ChrisVeigl and Eightpots by little-scale.

The Teensy-LC in open source designs

The gallery holds 12 open source boards using the Teensy-LC from 9 GitHub repositories; a typical one measures about 98.8 × 76.4 mm and carries around 41 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Interactive Core Memory Badge v0.2 by ageppert.

Microcontrollers on boards using the Teensy-LC

What boards using the Teensy-LC are built for

Teensy-LC: common questions

Where can I find a Teensy-LC reference design?

Each of the 12 boards on this page is a real design using the Teensy-LC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Teensy-LC 17_VIN pin connected?

The 17_VIN pin is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the Teensy-LC.

How is the Teensy-LC PROGRAM pin connected?

The PROGRAM pin is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the Teensy-LC.

How is the Teensy-LC AREF pin connected?

The AREF pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 8 open source designs using the Teensy-LC.

Which microcontrollers do boards using the Teensy-LC use?

Most are built on NXP (11) and RP2040/RP2350 (1).

How big is a typical board using the Teensy-LC?

The median is 98.8 × 76.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the Teensy-LC?

By GitHub stars, Interactive Core Memory Badge v0.2 by ageppert, with 16 stars.

Can I simulate one of these boards using the Teensy-LC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part