PCB Kurs
AGH-AIOTA·PCB_Kurs·Wersja 2.0/course_boards.kicad_pcb
About the PCB Kurs
PCB Kurs is an open source ESP32 PCB design by AGH-AIOTA, published on GitHub. It is a 2-layer board measuring 167.5 × 83.9 mm, with 33 components from 15 distinct parts.
Its main chip is the ESP32-C6-DevKitC-1, from the ESP32 family. By type, the board carries 10 diodes, 10 resistors, 3 connectors, 3 switches, 2 transistors and 1 IC.
From the project
i have no mouth and i must scream czyli kurs dla aghowców z elektroniki
Main components on the PCB Kurs
PCB Kurs bill of materials (BOM)
33 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-DevKitC-1 | ESP32-C6-DevKitC-1 | U1 |
| 2 | BC547 | TO-92L_Wide | Q1, Q3 |
| 1 | POWER_SOCKET | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | I2C_CONN | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | UART_CONN | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 3 | R_Potentiometer | Potentiometer_Alps_RK163_Single_Horizontal | RV5K1, RV5K2, RV5KK1 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
| 7 | LED | LED_D5.0mm | D1, D2, D3, D6, D7, D9, D10 |
| 2 | 1N4148WT | D_A-405_P7.62mm_Horizontal | D4, D5 |
| 1 | 1N4148WT | D_5W_P12.70mm_Horizontal | D8 |
| 1 | 1000uF | CP_Radial_D10.0mm_P5.00mm | C1 |
| 3 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 4 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R6, R7, R8 |
| 2 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R9 |
| 1 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
PCB Kurs design files
The KiCad project lives in the AGH-AIOTA/PCB_Kurs repository on GitHub; these links point at the commit this page was built from.
PCB Kurs: common questions
What microcontroller does the PCB Kurs use?
The PCB Kurs is built around the ESP32-C6-DevKitC-1, from the ESP32 family.
How big is the PCB Kurs?
The PCB Kurs measures 167.5 × 83.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB Kurs?
33 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB Kurs design files?
From the AGH-AIOTA/PCB_Kurs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB Kurs design in my own project?
The repository has no license, so all rights stay with AGH-AIOTA. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB Kurs without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k