RC12-3
AgOpenGPS-Official·Rate_Control·Nano/RC12-3/RC12-3.kicad_pcb
About the RC12-3 PCB
RC12-3 is an open source PCB design by AgOpenGPS-Official, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 89 × 100 mm, with 35 components from 29 distinct parts.
Other key parts include the C66405, ULN2803A and LM7805_TO220. By type, the board carries 9 resistors, 8 connectors, 7 capacitors, 6 diodes and 4 ICs.
It belongs with the robotics & motion designs in this gallery.
Main components on the RC12-3
RC12-3 bill of materials (BOM)
35 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C66405 PC817 | DIP-4_W7.62mm | U1, U2 |
| 1 | ULN2803A PC817 | DIP-4_W7.62mm | U3 |
| 1 | LM7805_TO220 MCP23017_SP | DIP-28_W7.62mm | U4 |
| 1 | Conn_01x15_Female | PinSocket_1x15_P2.54mm_Vertical | J1 |
| 1 | CONN_02X02_COUNTER_CLOCKWISE Conn_01x15_Female | PinSocket_1x15_P2.54mm_Vertical | J2 |
| 1 | I2C-3V3 Pressure | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | CONN_01X06_FEMALE Motor2 GRV | Grove | J4 |
| 1 | CONN_01X08_FEMALE Motor1 GRV | Grove | J5 |
| 1 | CONN_01X08_FEMALE Screw_Terminal_01x14 | TerminalBlock_Phoenix_PT-1,5-14-5.0-H_1x14_P5.00mm_Horizontal | J6 |
| 1 | CONN_01X08_FEMALE Relay | PinHeader_2x10_P2.54mm_Vertical | J7 |
| 1 | 12V Conn_01x05 | Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J9 |
| 1 | mEZD71201A | mEZD71201A | RG1 |
| 3 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D3, D4 |
| 1 | SS36 1N5408 | 1N5408 | D2 |
| 2 | BAT42 | D_DO-35_SOD27_P7.62mm_Horizontal | D5, D6 |
| 1 | 22UF 1000uF | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 10UF 10uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 1UF 2.2uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3 |
| 1 | 470UF 1000uF | CP_Radial_D10.0mm_P5.00mm | C4 |
| 1 | 330UF 0.1uf | C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.1UF 0.1uf | C_Disc_D5.0mm_W2.5mm_P2.50mm | C6 |
| 1 | 470UF 0.1uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C9 |
| 1 | 270 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 270 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 2 | 750 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 750 270 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R7 |
| 1 | 750 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 750 3K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 750 2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
RC12-3 design files
The KiCad project lives in the AgOpenGPS-Official/Rate_Control repository on GitHub; these links point at the commit this page was built from.
RC12-3: common questions
How big is the RC12-3 PCB?
The RC12-3 measures 89 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RC12-3?
35 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RC12-3 design files?
From the AgOpenGPS-Official/Rate_Control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RC12-3 design in my own project?
Yes, under the terms of its GPL-3.0 license, which AgOpenGPS-Official chose for the repository.
More boards in Rate_Control
NXP
RC11-2
AgOpenGPS-Official
159 × 130 mm100 parts4LGPL-3.020ESP32
RC14
AgOpenGPS-Official
145 × 108 mm88 parts2LGPL-3.020AVR/Arduino
Switchbox3
AgOpenGPS-Official
110 × 54 mm24 parts2LGPL-3.020AVR/Arduino
SW2
AgOpenGPS-Official
89 × 52 mm10 parts2LGPL-3.020RelayDriver
AgOpenGPS-Official
28 × 18 mm4 parts2LGPL-3.020
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979