MiniMelody

ahmadjamal789·MiniMelody·MiniMelody/MiniMelody.kicad_pcb

MiniMelody PCB layout, top view — open source RP2040/RP2350 board by ahmadjamal789

About the MiniMelody PCB

MiniMelody is an open source RP2040/RP2350 PCB design by ahmadjamal789, published on GitHub. It is a 2-layer board measuring 96.2 × 79 mm, with 16 components from 7 distinct parts.

Its main chip is the pi-Pico, from the RP2040/RP2350 family. Other key parts include the Sound Amp. By type, the board carries 2 ICs, 2 capacitors and 1 LED.

It belongs with the audio and displays & leds designs in this gallery.

From the project

a pocket-sized music board

A pocket-sized synth keyboard you can build yourself: 8 keys, a live OLED display, a rotary volume knob, and a real speaker, all on one custom PCB.

MiniMelody is a small electronic keyboard. Each of the 8 keys plays its own note, and you can press several keys at once to play chords and build up music. A small OLED shows the note and sound you are playing, and the audio comes out of a proper speaker through a digital amplifier, so it sounds much better than a basic buzzer.

MiniMelody, from the project README
From the project README

Main components on the MiniMelody

pi-PicoSound Amp

MiniMelody bill of materials (BOM)

16 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
pi-Pico
U1
1
Sound Amp
U2
1
Speaker pin
-1
10
320.01E11WHT
BTN_MODE1, BTN_OCT1, KEY_A1, KEY_B1, KEY_C1, KEY_D1, KEY_E1, KEY_F1 +2
1
OLED_Display
DS1
1
10UF
10uF
C1
1
100nF
C2

MiniMelody design files

The KiCad project lives in the ahmadjamal789/MiniMelody repository on GitHub; these links point at the commit this page was built from.

MiniMelody: common questions

What microcontroller does the MiniMelody use?

The MiniMelody is built around the pi-Pico, from the RP2040/RP2350 family.

How big is the MiniMelody PCB?

The MiniMelody measures 96.2 × 79 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MiniMelody?

16 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MiniMelody design files?

From the ahmadjamal789/MiniMelody repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MiniMelody design in my own project?

The repository has no license, so all rights stay with ahmadjamal789. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MiniMelody without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards