Starbie

ahmadjamal789·starbie

Starbie

About the Starbie PCB

Starbie is an open source ESP32 PCB design by ahmadjamal789, published on GitHub. It is a board, with 1 components from 1 distinct parts.

Its main chip is the XIAO-ESP32-C3, from the ESP32 family.

From the project

First PCB design

A tiny motion-controlled desktop pet, like a mini Tamagotchi. Starbie lives on a custom PCB with a small OLED screen for its face, two RGB LEDs that show its mood, and a motion sensor that wakes it up when you shake or move it.

- Shake to wake: the MPU6050 motion sensor detects movement and wakes Starbie up. - Sleeps when idle: after a while with no motion, Starbie goes to sleep and shows a sleeping face. - Shows emotions: the OLED shows faces with eyes and a mouth (happy, sad, sleepy and more). - Mood lights: two RGB LEDs change colour with its emotion, for example red when angry and green…

Main components on the Starbie

Starbie bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3
U1

Starbie design files

The KiCad project lives in the ahmadjamal789/starbie repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3, from the ESP32 family.

How many components are on the Starbie?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the ahmadjamal789/starbie repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with ahmadjamal789. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards