Starbie jamal789
ahmadjamal789·starbie-jamal789
About the Starbie jamal789 PCB
Starbie jamal789 is an open source ESP32 PCB design by ahmadjamal789, published on GitHub. It is a board, with 1 components from 1 distinct parts.
Its main chip is the XIAO-ESP32-C3, from the ESP32 family.
From the project
First PCB design
A tiny motion-controlled desktop pet, like a mini Tamagotchi. Starbie lives on a custom PCB with a small OLED screen for its face, two RGB LEDs that show its mood, and a motion sensor that wakes it up when you shake or move it.
- Shake to wake: the MPU6050 motion sensor detects movement and wakes Starbie up. - Sleeps when idle: after a while with no motion, Starbie goes to sleep and shows a sleeping face. - Shows emotions: the OLED shows faces with eyes and a mouth (happy, sad, sleepy and more). - Mood lights: two RGB LEDs change colour with its emotion, for example red when angry and green…
Main components on the Starbie jamal789
Starbie jamal789 bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3 | U1 |
Starbie jamal789 design files
The KiCad project lives in the ahmadjamal789/starbie-jamal789 repository on GitHub; these links point at the commit this page was built from.
- Schematicstarbie.kicad_sch
- BOMbom.csv
Starbie jamal789: common questions
What microcontroller does the Starbie jamal789 use?
The Starbie jamal789 is built around the XIAO-ESP32-C3, from the ESP32 family.
How many components are on the Starbie jamal789?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Starbie jamal789 design files?
From the ahmadjamal789/starbie-jamal789 repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Starbie jamal789 design in my own project?
The repository has no license, so all rights stay with ahmadjamal789. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Starbie jamal789 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k