HardLabs

FleetGuard

Ahmed-YSY·FleetGuard·Ahmeds_PCB/Try.kicad_pcb

FleetGuard PCB layout, top view — open source ESP32 board by Ahmed-YSY
Simulate this board

About the FleetGuard PCB

FleetGuard is an open source ESP32 PCB design by Ahmed-YSY, published on GitHub under the Custom license license. It is a 2-layer board measuring 106.5 × 66 mm, with 7 components from 5 distinct parts.

Its main chip is the ESP32-C3-DevKitM-1, from the ESP32 family. By type, the board carries 2 switches, 1 IC and 1 connector.

It belongs with the iot & wireless, rf & radio and sensors designs in this gallery.

From the project

IoT vehicle telematics for fleet & logistics — ESP32 + SIM7600G 4G/GPS tracker with fuel-theft detection, tamper/cargo security alarms, offline-resilient MQTT reporting, and OBD2 data over ESP-NOW. Includes firmware, KiCad PCB, and 3D enclosure.

A self-contained IoT telematics device for fleet & logistics vehicles — GPS tracking, fuel-theft detection, tamper/security alarms, and offline-resilient cloud reporting.

- Overview - Key Features - System Architecture - Repository Structure - Firmware Modules - Hardware - Getting Started - Configuration - ⚠️ Before You Publish — Security Checklist - Author - License

Main components on the FleetGuard

ESP32-C3-DevKitM-1

FleetGuard bill of materials (BOM)

7 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-DevKitM-1
U2
1
Sim 7600G
J2
1
5V
Power_Source1
2
SW_SPST
SW1, SW2
2
SW_SPST
SW_MG3, SW_MG4

FleetGuard design files

The KiCad project lives in the Ahmed-YSY/FleetGuard repository on GitHub; these links point at the commit this page was built from.

FleetGuard: common questions

What microcontroller does the FleetGuard use?

The FleetGuard is built around the ESP32-C3-DevKitM-1, from the ESP32 family.

How big is the FleetGuard PCB?

The FleetGuard measures 106.5 × 66 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FleetGuard?

7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FleetGuard design files?

From the Ahmed-YSY/FleetGuard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FleetGuard design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the FleetGuard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards