17 open source boards using the ESP32-C3-DevKitM-1
Real designs built with the ESP32-C3-DevKitM-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
FleetGuard
Ahmed-YSY
106.5 × 66 mm7 parts2LCustom license6ESP32
CNC-Router
diaxxu
115.4 × 66.6 mm28 parts2LMIT1ESP32
ESS Bottom
shrimp-18
70.8 × 51.4 mm14 parts2LNo license1NXP
Two motor driver
owhite
101 × 60 mm52 parts4LNo license0ESP32
Panic button
HenraL
68.2 × 63.3 mm43 parts2LMIT0ESP32
Electrone shelving
F9Motion
52.6 × 52.6 mm21 parts2LNo license0ESP32
RGB-Lamp
F9Motion
70 × 70 mm16 parts2LNo license0ESP32
Esp32-sensor daq
EldinLz
73.5 × 65.5 mm16 parts2LNo license0ESP32
Tomato
andylin08
88.1 × 75.3 mm15 parts2LNo license0ESP32
CustomMacroPad
Jack-Jacobson
114.3 × 76.2 mm10 parts2LNo license0ESP32
KiBot
faatihozkaan
39.4 × 48 mm5 parts6LMIT0ESP32
Opensauce outfit
possiblyselena
76 × 29 mm3 parts2LNo license0- schematic only · 20 partsESP32
Watt the hack
pandaiscodingcpu
20 partsNo license0 - schematic only · 13 partsESP32
Unplugged DJS
Ashutosh2005Ashu
13 partsNo license0 ESP32
UPSV2concepttocheck
IoTCloudStudio
135.3 × 51 mm65 parts2LNo license1ESP32
IDM-RoomSensor-ESP-B-ES1
Xerolux
145 × 78 mm20 parts2LCERN-OHL-S-2.00ESP32
IDM-FakeSensor-ESP-B-ES1
Xerolux
145 × 78 mm18 parts2LCERN-OHL-S-2.00
How designs wire the ESP32-C3-DevKitM-1
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the ESP32-C3-DevKitM-1 connects to, and the resistors, capacitors and other passives placed on it.
- The RST pin is left unconnected on 14 of 14 designs.
- The RX pin is left unconnected on 13 of 14 designs.
- The TX pin is left unconnected on 13 of 14 designs.
- The IO0 pin is left unconnected on 11 of 14 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 6, 8, 12, 15, 16, 19, 24, 27, 30 | Connected to: GND 64% · a signal 29% | — |
| RSTpin 7 | Connected to: Not connected 100% | — |
| IO0pin 9 | Connected to: Not connected 79% · a signal 21% | — |
| IO1pin 10 | Connected to: Not connected 64% · a signal 36% | — |
| IO10pin 11 | Connected to: Not connected 64% · a signal 36% | — |
| IO19pin 17 | Connected to: Not connected 79% · a signal 21% | — |
| IO18pin 18 | Connected to: Not connected 71% · a signal 29% | — |
| IO9pin 26 | Connected to: Not connected 71% · a signal 29% | — |
| RXpin 28 | Connected to: Not connected 93% | — |
| TXpin 29 | Connected to: Not connected 93% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FleetGuard by Ahmed-YSY, CNC-Router by diaxxu, UPSV2concepttocheck by IoTCloudStudio and ESS Bottom by shrimp-18.
The ESP32-C3-DevKitM-1 in open source designs
The gallery holds 17 open source boards using the ESP32-C3-DevKitM-1 from 16 GitHub repositories; a typical one measures about 88.1 × 65.5 mm and carries around 16 components.
87% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is FleetGuard by Ahmed-YSY.
Parts used alongside the ESP32-C3-DevKitM-1
What boards using the ESP32-C3-DevKitM-1 are built for
ESP32-C3-DevKitM-1: common questions
Where can I find a ESP32-C3-DevKitM-1 reference design?
Each of the 17 boards on this page is a real design using the ESP32-C3-DevKitM-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-C3-DevKitM-1 RST pin connected?
The RST pin is left unconnected on 14 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the ESP32-C3-DevKitM-1.
How is the ESP32-C3-DevKitM-1 RX pin connected?
The RX pin is left unconnected on 13 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the ESP32-C3-DevKitM-1.
How is the ESP32-C3-DevKitM-1 TX pin connected?
The TX pin is left unconnected on 13 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the ESP32-C3-DevKitM-1.
What parts are used alongside the ESP32-C3-DevKitM-1?
The ER_OLEDM0.91_1x-I2C, MCP73831-2-MC, MT3608, NEO-6M-GPS and TB6612FNG appear in the most repositories here.
Which microcontrollers do boards using the ESP32-C3-DevKitM-1 use?
Most are built on ESP32 (16) and NXP (1).
How big is a typical board using the ESP32-C3-DevKitM-1?
The median is 88.1 × 65.5 mm, and 87% are two-layer designs.
What is the most popular open source board using the ESP32-C3-DevKitM-1?
By GitHub stars, FleetGuard by Ahmed-YSY, with 6 stars.
Can I simulate one of these boards using the ESP32-C3-DevKitM-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.