STM32 JNBG
Ahmed0Sherif·STM32_JNBG·STM32_mini/STM32_mini.kicad_pcb
About the STM32 JNBG PCB
STM32 JNBG is an open source STM32 PCB design by Ahmed0Sherif, published on GitHub under the MIT license. It is a 2-layer board measuring 52.5 × 51.5 mm, with 33 components from 24 distinct parts.
Its main chip is the STM32F030F4Px, from the STM32 family. Other key parts include the AMS1117-3.3, CH340C and USBLC6-2SC6. By type, the board carries 10 capacitors, 7 resistors, 5 connectors, 4 ICs, 3 diodes and 2 switches.
It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
This repository includes the design of a development board based on the STM32f030f4p6
Main components on the STM32 JNBG
STM32 JNBG bill of materials (BOM)
33 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030F4Px | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | 32MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 2 | Conn_01x04_Female | PinSocket_1x04_P2.54mm_Vertical | J1, J3 |
| 1 | Conn_01x05_Female | PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194_Horizontal | J4 |
| 1 | Conn_01x02_Female | PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 1 | SW_SPDT | SW_CuK_OS102011MA1QN1_SPDT_Angled | SW2 |
| 1 | SMAJ5.0A | D_SMB | D1 |
| 2 | LED | LED_0805_2012Metric | D2, D3 |
| 1 | 100R | L_0805_2012Metric | FB1 |
| 1 | 10n | C_0603_1608Metric | C1 |
| 2 | 1u | C_0603_1608Metric | C2, C3 |
| 1 | 4.7u | C_0603_1608Metric | C4 |
| 1 | 100n | C_0603_1608Metric | C5 |
| 2 | 10p | C_0603_1608Metric | C6, C7 |
| 2 | 22u | C_0805_2012Metric | C8, C9 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47n | C_0805_2012Metric | C10 |
| 3 | 10k | R_0603_1608Metric | R1, R3, R4 |
| 1 | 1k | R_0603_1608Metric | R2 |
| 3 | 1k5 | R_0603_1608Metric | R5, R6, R7 |
STM32 JNBG design files
The KiCad project lives in the Ahmed0Sherif/STM32_JNBG repository on GitHub; these links point at the commit this page was built from.
STM32 JNBG: common questions
What microcontroller does the STM32 JNBG use?
The STM32 JNBG is built around the STM32F030F4Px, from the STM32 family.
How big is the STM32 JNBG PCB?
The STM32 JNBG measures 52.5 × 51.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32 JNBG?
33 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32 JNBG design files?
From the Ahmed0Sherif/STM32_JNBG repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32 JNBG design in my own project?
Yes, under the terms of its MIT license, which Ahmed0Sherif chose for the repository.
Can I test firmware for the STM32 JNBG without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k