SENTINEL Clock & Timing Distribution
ajisrawi·sentinel-uhf-radar·hardware/clock_board/SENTINEL_CLOCK.kicad_pcb
About the SENTINEL Clock & Timing Distribution PCB
SENTINEL Clock & Timing Distribution is an open source STM32 PCB design by ajisrawi, published on GitHub. It is a 4-layer board measuring 150 × 130 mm, with 59 components from 34 distinct parts.
Its main chip is the STM32G031K8T6, from the STM32 family. Other key parts include the PLL, 74LVC1G17, 74LVC1G175, SN65LVDS047 and THVD1450. By type, the board carries 23 capacitors, 13 ICs, 13 connectors, 8 resistors, 1 crystal and 1 diode.
It belongs with the rf & radio designs in this gallery.
From the project
Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model
- What this is - Key numbers - Architecture - System design - Antenna and EM simulation - Electronics: seven custom boards - Site and building - Cost estimate - Repository layout - Reproduce everything - Verification status and known gaps - Notes
SENTINEL-UHF is an engineering reference design for a ground-based early-warning radar in the class of PAVE PAWS / UEWR. It is built from public radar engineering principles, and every number in it comes from code in this repository:

Main components on the SENTINEL Clock & Timing Distribution
SENTINEL Clock & Timing Distribution bill of materials (BOM)
59 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PLL | TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | 74LVC1G17 | SOT-23-5 | U2 |
| 1 | 74LVC1G175 | SOT-363_SC-70-6 | U3 |
| 6 | SN65LVDS047 | SOIC-16_3.9x9.9mm_P1.27mm | U4, U5, U6, U7, U8, U9 |
| 1 | STM32G031K8T6 | LQFP-32_7x7mm_P0.8mm | U10 |
| 1 | THVD1450 | SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 2 | AP2112K-3.3 | SOT-23-5 | U12, U13 |
| 1 | 122.88MHZ 122.88MHz | Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm | Y1 |
| 1 | 10MHz IN | SMA_Amphenol_132289_EdgeMount | J1 |
| 1 | PPS IN | SMA_Amphenol_132289_EdgeMount | J2 |
| 1 | TILE1 | PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | TILE2 | PinHeader_2x05_P2.54mm_Vertical | J4 |
| 1 | TILE3 | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | TILE4 | PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | TILE5 | PinHeader_2x05_P2.54mm_Vertical | J7 |
| 1 | TILE6 | PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | TILE7 | PinHeader_2x05_P2.54mm_Vertical | J9 |
| 1 | TILE8 | PinHeader_2x05_P2.54mm_Vertical | J10 |
| 1 | RS485 | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J12 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 5V IN | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J13 |
| 1 | LOCK | LED_0603_1608Metric | D1 |
| 14 | 100N 100n | C_0603_1608Metric | C1, C13, C14, C15, C16, C17, C18, C19 +6 |
| 1 | 2.2N 2.2n | C_0603_1608Metric | C4 |
| 1 | 22N 22n | C_0603_1608Metric | C5 |
| 1 | 1n | C_0603_1608Metric | C6 |
| 2 | 100P 100p | C_0603_1608Metric | C7, C8 |
| 4 | 1u | C_0603_1608Metric | C9, C10, C11, C12 |
| 2 | 51 | R_0603_1608Metric | R1, R2 |
| 1 | 5.1K 5.1k | R_0603_1608Metric | R3 |
| 1 | 3.3K 3.3k | R_0603_1608Metric | R4 |
| 1 | 6.8K 6.8k | R_0603_1608Metric | R5 |
| 2 | 33 | R_0603_1608Metric | R6, R7 |
| 1 | 1k | R_0603_1608Metric | R8 |
SENTINEL Clock & Timing Distribution design files
The KiCad project lives in the ajisrawi/sentinel-uhf-radar repository on GitHub; these links point at the commit this page was built from.
SENTINEL Clock & Timing Distribution: common questions
What microcontroller does the SENTINEL Clock & Timing Distribution use?
The SENTINEL Clock & Timing Distribution is built around the STM32G031K8T6, from the STM32 family.
How big is the SENTINEL Clock & Timing Distribution PCB?
The SENTINEL Clock & Timing Distribution measures 150 × 130 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SENTINEL Clock & Timing Distribution?
59 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SENTINEL Clock & Timing Distribution design files?
From the ajisrawi/sentinel-uhf-radar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SENTINEL Clock & Timing Distribution design in my own project?
The repository has no license, so all rights stay with ajisrawi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SENTINEL Clock & Timing Distribution without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in sentinel-uhf-radar
STM32
SENTINEL-UHF T/R Module, 420-450 MHz, 300 W
ajisrawi
230 × 152 mm140 parts4LNo license0SENTINEL RFSoC Tile Carrier
ajisrawi
240 × 190 mm114 parts4LNo license0SENTINEL Tile Backplane
ajisrawi
232 × 112 mm53 parts4LNo license0STM32
SENTINEL Subarray PSU 380 V -> 50 V
ajisrawi
300 × 185 mm52 parts4LNo license0SENTINEL Calibration Network
ajisrawi
120 × 82 mm35 parts4LNo license0SENTINEL Element Feed Board
ajisrawi
86 × 56 mm17 parts4LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k