SENTINEL Element Feed Board
ajisrawi·sentinel-uhf-radar·hardware/feed_board/SENTINEL_FEED.kicad_pcb
About the SENTINEL Element Feed Board
SENTINEL Element Feed Board is an open source PCB design by ajisrawi, published on GitHub. It is a 4-layer board measuring 86 × 56 mm, with 17 components from 12 distinct parts.
Other key parts include the HYB 3dB. By type, the board carries 6 inductors, 4 capacitors, 3 connectors, 2 transformers, 1 IC and 1 resistor.
It belongs with the rf & radio designs in this gallery.
From the project
Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model
- What this is - Key numbers - Architecture - System design - Antenna and EM simulation - Electronics: seven custom boards - Site and building - Cost estimate - Repository layout - Reproduce everything - Verification status and known gaps - Notes
SENTINEL-UHF is an engineering reference design for a ground-based early-warning radar in the class of PAVE PAWS / UEWR. It is built from public radar engineering principles, and every number in it comes from code in this repository:

Main components on the SENTINEL Element Feed Board
SENTINEL Element Feed Board bill of materials (BOM)
17 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HYB 3dB | Hybrid90_SMD_15x10 | U1 |
| 1 | FROM T/R | N_EdgeLaunch | J1 |
| 1 | DIPOLE X | DipoleArm_M4_Pair | J2 |
| 1 | DIPOLE Y | DipoleArm_M4_Pair | J3 |
| 2 | 1:1 | Balun_SMD_10x8 | T1, T2 |
| 1 | 11.2N 11.2n | L_1210_3225Metric | L1 |
| 1 | 20.7N 20.7n | L_1210_3225Metric | L2 |
| 4 | 1u | L_0805_2012Metric | L3, L4, L5, L6 |
| 1 | DNP | C_2220_5750Metric | C1 |
| 2 | DNP tune | C_2220_5750Metric | C2, C4 |
| 1 | 3.9P 3.9p | C_2220_5750Metric | C3 |
| 1 | 50 100W | Termination_100W_SMD | R1 |
SENTINEL Element Feed Board design files
The KiCad project lives in the ajisrawi/sentinel-uhf-radar repository on GitHub; these links point at the commit this page was built from.
SENTINEL Element Feed Board: common questions
How big is the SENTINEL Element Feed Board?
The SENTINEL Element Feed Board measures 86 × 56 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SENTINEL Element Feed Board?
17 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SENTINEL Element Feed Board design files?
From the ajisrawi/sentinel-uhf-radar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SENTINEL Element Feed Board design in my own project?
The repository has no license, so all rights stay with ajisrawi. Use it as a reference, and ask the author before reusing the design.
More boards in sentinel-uhf-radar
STM32
SENTINEL-UHF T/R Module, 420-450 MHz, 300 W
ajisrawi
230 × 152 mm140 parts4LNo license0SENTINEL RFSoC Tile Carrier
ajisrawi
240 × 190 mm114 parts4LNo license0STM32
SENTINEL Clock & Timing Distribution
ajisrawi
150 × 130 mm59 parts4LNo license0SENTINEL Tile Backplane
ajisrawi
232 × 112 mm53 parts4LNo license0STM32
SENTINEL Subarray PSU 380 V -> 50 V
ajisrawi
300 × 185 mm52 parts4LNo license0SENTINEL Calibration Network
ajisrawi
120 × 82 mm35 parts4LNo license0
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568