82 open source boards using the 74LVC1G17

Real designs built with the 74LVC1G17, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

82 boardsClear filters|Most starred

How designs wire the 74LVC1G17

Read from the KiCad layouts of 66 open source designs, one per repository: what each pin of the 74LVC1G17 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 48 of 65 designs, most often 100 nF (then 10 nF).
NCpin 1Connected to: Not connected 92%
V1pin 4Connected to: Signal 98%
  • Series resistor on 34% · 100 Ω (6), 150 Ω (2), 1 kΩ (2)
VCCpin 5Connected to: 5V 94%
  • Decoupling capacitor on 74% · 100 nF (57), 10 nF (6), 10 µF (2)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Voron badge by tanaes, GB-MBCTEST by Gekkio, Vaio re by CRImier and PocketPD HW by CentyLab.

The 74LVC1G17 in open source designs

The gallery holds 82 open source boards using the 74LVC1G17 from 66 GitHub repositories; a typical one measures about 87.6 × 71.4 mm and carries around 84 components.

62% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Voron badge by tanaes.

Microcontrollers on boards using the 74LVC1G17

74LVC1G17: common questions

Where can I find a 74LVC1G17 reference design?

Each of the 82 boards on this page is a real design using the 74LVC1G17. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC1G17 VCC pin?

The VCC pin has a decoupling capacitor on 48 of 65 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 66 open source designs using the 74LVC1G17.

What parts are used alongside the 74LVC1G17?

The 74LVC1G07, AP2112K-3.3, USBLC6-2SC6, AMS1117-3.3 and 25LCxxx appear in the most repositories here.

Which microcontrollers do boards using the 74LVC1G17 use?

Most are built on ESP32 (15), RP2040/RP2350 (10), STM32 (10) and AVR/Arduino (5).

How big is a typical board using the 74LVC1G17?

The median is 87.6 × 71.4 mm, and 62% are two-layer designs.

What is the most popular open source board using the 74LVC1G17?

By GitHub stars, Voron badge by tanaes, with 781 stars.

Can I simulate one of these boards using the 74LVC1G17 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part