5 open source boards using the 74LVC1G175

Real designs built with the 74LVC1G175, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 74LVC1G175

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LVC1G175 connects to, and the resistors, capacitors and other passives placed on it.

  • The Q pin has a series resistor on 3 of 5 designs, most often 33 Ω (then 220 Ω).
  • The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF.
GNDpin 2Connected to: GND 100%
Qpin 4Connected to: A connector 40%
  • Series resistor on 60% · 33 Ω (1), 220 Ω (1)
VCCpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 40% · 100 nF (2)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Crosspoint switches by RepRapLtd, Vape light by sbyd-space, SENTINEL Clock & Timing Distribution by ajisrawi and Temp kicad by charlespax.

The 74LVC1G175 in open source designs

The gallery holds 5 open source boards using the 74LVC1G175 from 5 GitHub repositories; a typical one measures about 58.3 × 45.7 mm and carries around 33 components.

60% use four copper layers or more, and 60% carry an open source license.

The most starred is Crosspoint switches by RepRapLtd.

Microcontrollers on boards using the 74LVC1G175

What boards using the 74LVC1G175 are built for

74LVC1G175: common questions

Where can I find a 74LVC1G175 reference design?

Each of the 5 boards on this page is a real design using the 74LVC1G175. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 74LVC1G175 Q pin?

The Q pin has a series resistor on 3 of 5 designs, most often 33 Ω (then 220 Ω). Counted from the KiCad layouts of 5 open source designs using the 74LVC1G175.

What decoupling capacitors do designs use on the 74LVC1G175 VCC pin?

The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74LVC1G175.

Which microcontrollers do boards using the 74LVC1G175 use?

Most are built on RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the 74LVC1G175?

The median is 58.3 × 45.7 mm, and 40% are two-layer designs.

What is the most popular open source board using the 74LVC1G175?

By GitHub stars, Crosspoint switches by RepRapLtd, with 8 stars.

Can I simulate one of these boards using the 74LVC1G175 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part