SENTINEL Subarray PSU 380 V -> 50 V
ajisrawi·sentinel-uhf-radar·hardware/psu/SENTINEL_PSU.kicad_pcb
About the SENTINEL Subarray PSU 380 V -> 50 V PCB
SENTINEL Subarray PSU 380 V -> 50 V is an open source STM32 PCB design by ajisrawi, published on GitHub. It is a 4-layer board measuring 300 × 185 mm, with 52 components from 36 distinct parts.
Its main chip is the STM32G031K8T6, from the STM32 family. Other key parts include the 380V->50V 600W, PC817, 48V->12V 50W, LM1117-3.3 and THVD1450. By type, the board carries 14 capacitors, 13 resistors, 9 ICs, 6 connectors, 4 diodes and 1 transistor.
It belongs with the rf & radio designs in this gallery.
From the project
Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model
- What this is - Key numbers - Architecture - System design - Antenna and EM simulation - Electronics: seven custom boards - Site and building - Cost estimate - Repository layout - Reproduce everything - Verification status and known gaps - Notes
SENTINEL-UHF is an engineering reference design for a ground-based early-warning radar in the class of PAVE PAWS / UEWR. It is built from public radar engineering principles, and every number in it comes from code in this repository:

Main components on the SENTINEL Subarray PSU 380 V -> 50 V
SENTINEL Subarray PSU 380 V -> 50 V bill of materials (BOM)
52 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 380V->50V 600W | Brick_Full_THT | U1, U2 |
| 2 | PC817 | SMDIP-4_W7.62mm | U3, U4 |
| 1 | 48V->12V 50W | Brick_16_THT | U5 |
| 1 | LM1117-3.3 | TO-252-3_TabPin2 | U6 |
| 1 | STM32G031K8T6 | LQFP-32_7x7mm_P0.8mm | U7 |
| 1 | THVD1450 | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | INA240A1 | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | 380VDC IN | Terminal_HV_2P_7.62 | J1 |
| 1 | +50V STUD | Stud_M6 | J2 |
| 1 | 0V STUD | Stud_M6 | J3 |
| 1 | 12V OUT | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J4 |
| 1 | RS485 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | 6.3A 500V | Fuse_Clips_5x20 | F1 |
| 1 | G2RL-1A 12V | Relay_SPST_Omron_G2RL-1A | K1 |
| 1 | 10R NTC | NTC_Disc_D15_P7.5 | RT1 |
| 2 | 10k NTC | R_0603_1608Metric | TH1, TH2 |
| 2 | 100V 60A | TO-247-2_Vertical | D1, D2 |
| 1 | 1N4148W | D_SOD-123 | D3 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRN | LED_0603_1608Metric | D4 |
| 2 | 10u 450V | C_Rect_L26.5mm_W10.5mm_P22.50mm_MKS4 | C1, C2 |
| 4 | 1000u 63V | CP_Radial_D18.0mm_P7.50mm | C3, C4, C5, C6 |
| 1 | 10u 100V | C_1210_3225Metric | C7 |
| 1 | 10N 10n | C_0603_1608Metric | C8 |
| 1 | 22u 25V | C_1210_3225Metric | C9 |
| 2 | 10U 10u | C_1210_3225Metric | C10, C11 |
| 3 | 100N 100n | C_0603_1608Metric | C12, C13, C14 |
| 2 | 470 | R_0603_1608Metric | R1, R2 |
| 2 | value per brick datasheet trim | R_0603_1608Metric | R3, R4 |
| 3 | 10K 10k | R_0603_1608Metric | R5, R6, R10 |
| 1 | 1m | R_2512_6332Metric | R7 |
| 2 | 1k | R_0603_1608Metric | R8, R13 |
| 1 | 200K 200k | R_0603_1608Metric | R9 |
| 1 | 100 | R_0603_1608Metric | R11 |
| 1 | 100K 100k | R_0603_1608Metric | R12 |
SENTINEL Subarray PSU 380 V -> 50 V design files
The KiCad project lives in the ajisrawi/sentinel-uhf-radar repository on GitHub; these links point at the commit this page was built from.
SENTINEL Subarray PSU 380 V -> 50 V: common questions
What microcontroller does the SENTINEL Subarray PSU 380 V -> 50 V use?
The SENTINEL Subarray PSU 380 V -> 50 V is built around the STM32G031K8T6, from the STM32 family.
How big is the SENTINEL Subarray PSU 380 V -> 50 V PCB?
The SENTINEL Subarray PSU 380 V -> 50 V measures 300 × 185 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SENTINEL Subarray PSU 380 V -> 50 V?
52 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SENTINEL Subarray PSU 380 V -> 50 V design files?
From the ajisrawi/sentinel-uhf-radar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SENTINEL Subarray PSU 380 V -> 50 V design in my own project?
The repository has no license, so all rights stay with ajisrawi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SENTINEL Subarray PSU 380 V -> 50 V without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in sentinel-uhf-radar
STM32
SENTINEL-UHF T/R Module, 420-450 MHz, 300 W
ajisrawi
230 × 152 mm140 parts4LNo license0SENTINEL RFSoC Tile Carrier
ajisrawi
240 × 190 mm114 parts4LNo license0STM32
SENTINEL Clock & Timing Distribution
ajisrawi
150 × 130 mm59 parts4LNo license0SENTINEL Tile Backplane
ajisrawi
232 × 112 mm53 parts4LNo license0SENTINEL Calibration Network
ajisrawi
120 × 82 mm35 parts4LNo license0SENTINEL Element Feed Board
ajisrawi
86 × 56 mm17 parts4LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k