4 open source boards using the INA240A1
Real designs built with the INA240A1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Gesc
CTSchorsch
111 × 111 mm150 parts4LNo license17STM32
PCB-0018-A bldc motor driver
ihsan-sa
78 × 78 mm160 parts4LMIT0STM32
SENTINEL-UHF T/R Module, 420-450 MHz, 300 W
ajisrawi
230 × 152 mm140 parts4LNo license0STM32
SENTINEL Subarray PSU 380 V -> 50 V
ajisrawi
300 × 185 mm52 parts4LNo license0
The INA240A1 in open source designs
The gallery holds 4 open source boards using the INA240A1 from 3 GitHub repositories; a typical one measures about 170.5 × 131.5 mm and carries around 145 components.
100% use four copper layers or more, and 25% carry an open source license.
The most starred is Gesc by CTSchorsch.
Microcontrollers on boards using the INA240A1
What boards using the INA240A1 are built for
INA240A1: common questions
Where can I find a INA240A1 reference design?
Each of the 4 boards on this page is a real design using the INA240A1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA240A1 use?
Most are built on STM32 (4).
How big is a typical board using the INA240A1?
The median is 170.5 × 131.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA240A1?
By GitHub stars, Gesc by CTSchorsch, with 17 stars.
Can I simulate one of these boards using the INA240A1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.