Giga shield v04 routed v2
About the Giga shield v04 routed v2
Giga shield v04 routed v2 is an open source PCB design by ajokela, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 155 × 90 mm, with 60 components from 13 distinct parts.
Other key parts include the SN74LVC8T245PW. By type, the board carries 29 capacitors, 11 connectors, 10 ICs and 10 resistors.
It belongs with the retro computing, iot & wireless and dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Arduino Giga R1 WiFi Shield with SN74LVC8T245PW driven level shifters for Z80 RetroShield interfacing
A simulated-annealing PCB component placer in ~500 lines of Python.
Purpose: Provide an open-source alternative to commercial ML placers (Quilter.ai) for benchmark comparison with Freerouting. Takes a KiCad PCB file with components moved off-board and produces a placed PCB file. Does not route — pair with Freerouting for that.
Classic Kirkpatrick-style simulated annealing:
Main components on the Giga shield v04 routed v2
Giga shield v04 routed v2 bill of materials (BOM)
60 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | SN74LVC8T245PW | TSSOP-24_4.4x7.8mm_P0.65mm | U1, U2, U3, U4, U5, U6, U7, U8 +1 |
| 1 | SN74LVC8T245PW | TSSOP-24_4.4x7.8mm_P0.65mm | U10 |
| 5 | Conn_01x08 | Connector_PinHeader_1x08_P2.54mm_Vertical | J1, J3, J4, J6, J7 |
| 1 | Conn_01x10 | Connector_PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | J_ANALOG | Connector_PinHeader_1x26_P2.54mm_Vertical | J5 |
| 1 | J_DIGITAL | Connector_PinHeader_1x26_P2.54mm_Vertical | J8 |
| 1 | JSIDE | Connector_PinHeader_2x18_P2.54mm_Vertical | J9 |
| 1 | JSIDE_5V | Connector_PinHeader_2x18_P2.54mm_Vertical | J10 |
| 1 | DIR_CTRL | Connector_PinHeader_1x11_P2.54mm_Vertical | J11 |
| 27 | 0.1UF 0.1uF | R_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +19 |
| 2 | 0.1uF | R_0603_1608Metric | C28, C29 |
| 9 | 10K | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 1 | 10K | R_0603_1608Metric | R10 |
Giga shield v04 routed v2 design files
The KiCad project lives in the ajokela/giga-shield repository on GitHub; these links point at the commit this page was built from.
Giga shield v04 routed v2: common questions
How big is the Giga shield v04 routed v2?
The Giga shield v04 routed v2 measures 155 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Giga shield v04 routed v2?
60 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Giga shield v04 routed v2 design files?
From the ajokela/giga-shield repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Giga shield v04 routed v2 design in my own project?
Yes, under the terms of its BSD-3-Clause license, which ajokela chose for the repository.
More boards in giga-shield
Giga shield v03 final
154.5 × 89.5 mm60 parts6LBSD-3-Clause1
Giga shield v05
155 × 90 mm60 parts2LBSD-3-Clause1
Giga shield v04 placed v4
155 × 90 mm60 parts2LBSD-3-Clause1
Giga shield v04 manualseed
155 × 90 mm60 parts2LBSD-3-Clause1
AlexJ bz ArduinoGigaShield
155 × 90 mm55 parts2LBSD-3-Clause1
Earlier revisions in the repo: giga_shield_v04_routed
Similar boards
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
24pin flex interposer
29 × 32 mm3 parts2LNo license508