Giga shield v05
ajokela·giga-shield
About the Giga shield v05
Giga shield v05 is an open source PCB design by ajokela, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 155 × 90 mm, with 60 components from 13 distinct parts.
Other key parts include the SN74LVC8T245PW. By type, the board carries 29 capacitors, 11 connectors, 10 ICs and 10 resistors.
It belongs with the retro computing, iot & wireless and dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Arduino Giga R1 WiFi Shield with SN74LVC8T245PW driven level shifters for Z80 RetroShield interfacing
This is a redesigned shield/daughter board for the Arduino Giga R1 WiFi that replaces the original TXB0108PW auto-sensing bidirectional level translators with SN74LVC8T245PW driven (direction-controlled) level shifters.
The board provides 72 channels of 3.3V-to-5V level shifting across 9 ICs, mapping the Giga's 3.3V GPIO signals to 5V-compatible headers suitable for interfacing with retro hardware such as the Z80 CPU via a RetroShield.
Main components on the Giga shield v05
Giga shield v05 bill of materials (BOM)
60 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | SN74LVC8T245PW | TSSOP-24_4.4x7.8mm_P0.65mm | U1, U2, U3, U4, U5, U6, U7, U8 +1 |
| 1 | SN74LVC8T245PW | TSSOP-24_4.4x7.8mm_P0.65mm | U10 |
| 5 | Conn_01x08 | Connector_PinHeader_1x08_P2.54mm_Vertical | J1, J3, J4, J6, J7 |
| 1 | Conn_01x10 | Connector_PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | J_ANALOG | Connector_PinHeader_1x26_P2.54mm_Vertical | J5 |
| 1 | J_DIGITAL | Connector_PinHeader_1x26_P2.54mm_Vertical | J8 |
| 1 | JSIDE | Connector_PinHeader_2x18_P2.54mm_Vertical | J9 |
| 1 | JSIDE_5V | Connector_PinHeader_2x18_P2.54mm_Vertical | J10 |
| 1 | DIR_CTRL | Connector_PinHeader_1x11_P2.54mm_Vertical | J11 |
| 27 | 0.1UF 0.1uF | R_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +19 |
| 2 | 0.1uF | R_0603_1608Metric | C28, C29 |
| 9 | 10K | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 1 | 10K | R_0603_1608Metric | R10 |
Giga shield v05 design files
The KiCad project lives in the ajokela/giga-shield repository on GitHub; these links point at the commit this page was built from.
Giga shield v05: common questions
How big is the Giga shield v05?
The Giga shield v05 measures 155 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Giga shield v05?
60 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Giga shield v05 design files?
From the ajokela/giga-shield repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Giga shield v05 design in my own project?
Yes, under the terms of its BSD-3-Clause license, which ajokela chose for the repository.
More boards in giga-shield
Giga shield v04 routed v2
ajokela
155 × 90 mm60 parts2LBSD-3-Clause1Giga shield v04 placed v4
ajokela
155 × 90 mm60 parts2LBSD-3-Clause1Giga shield v03 final
ajokela
154.5 × 89.5 mm60 parts6LBSD-3-Clause1Giga shield v04 manualseed
ajokela
155 × 90 mm60 parts2LBSD-3-Clause1AlexJ bz ArduinoGigaShield
ajokela
155 × 90 mm55 parts2LBSD-3-Clause1
Earlier revisions in the repo: giga_shield_v04
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k