Retroshield level shifter
ajokela·retroshield-level-shifter-pcb·kicad/AlexJ_bz_ArduinoGigaShield.kicad_pcb
About the Retroshield level shifter PCB
Retroshield level shifter is an open source PCB design by ajokela, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 155 × 90 mm, with 55 components from 8 distinct parts.
Other key parts include the TXB0108PW. By type, the board carries 27 capacitors, 10 connectors, 9 ICs and 9 resistors.
It belongs with the retro computing, iot & wireless and dev boards & breakouts designs in this gallery.
From the project
KiCad design files for a 3.3V-to-5V level converter shield between Arduino Giga R1 WiFi and RetroShield Z80
KiCad design files for a bidirectional 3.3V-to-5V level converter shield that sits between an Arduino Giga R1 WiFi and a RetroShield Z80. The shield translates all bus signals between the Giga's 3.3V logic and the RetroShield's 5V logic.
The shield uses nine TXB0108PW 8-bit bidirectional level converter ICs, providing 72 channels of voltage translation. The TXB0108 uses automatic direction sensing — it detects which side is driving each signal and translates accordingly.

Main components on the Retroshield level shifter
Retroshield level shifter bill of materials (BOM)
55 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | TXB0108PW | TSSOP-20_4.4x6.5mm_P0.65mm | U1, U2, U3, U4, U5, U6, U7, U8 +1 |
| 5 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1, J3, J4, J6, J7 |
| 1 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 2 | Conn_01x26 | PinHeader_1x26_P2.54mm_Vertical | J5, J8 |
| 1 | JSIDE | PinHeader_2x18_P2.54mm_Vertical | J9 |
| 1 | JSIDE_5V | PinHeader_2x18_P2.54mm_Vertical | J10 |
| 27 | 0.1uF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +19 |
| 9 | 10K | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
Retroshield level shifter design files
The KiCad project lives in the ajokela/retroshield-level-shifter-pcb repository on GitHub; these links point at the commit this page was built from.
Retroshield level shifter: common questions
How big is the Retroshield level shifter PCB?
The Retroshield level shifter measures 155 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Retroshield level shifter?
55 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Retroshield level shifter design files?
From the ajokela/retroshield-level-shifter-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Retroshield level shifter design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ajokela chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k