8 open source boards using the TXB0108PW
Real designs built with the TXB0108PW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Opentrig
Dawson-HEP
162.2 × 100 mm408 parts4LEPL-2.068510C-Tang-Nano-9K-FPGA
ik2biy
51 × 127.2 mm11 parts2LGPL-3.02Epaper hat
jabr0ni
97.4 × 36.8 mm40 parts2LNo license1Retroshield level shifter
ajokela
155 × 90 mm55 parts2LCC-BY-SA-4.00AVR/Arduino
Slice RTDM
feastorg
70 × 100 mm44 parts2LGPL-3.00Raspberry Pi
Seekink-E-paper-HAT-for-Rpi
ANSHUMANDOCX
65 × 32.2 mm36 parts2LNo license0Fpga to pcie
mertwole
102.3 × 47.3 mm11 parts2LNo license0RP2040/RP2350
Servid rp2040-hdmi proto rev1
baldengineer
88.1 × 34.5 mm99 parts4LMIT33
How designs wire the TXB0108PW
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TXB0108PW connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF).
- The VCCB pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 2 | Connected to: 3.3V 88% |
|
| GNDpin 11 | Connected to: GND 100% | — |
| VCCBpin 19 | Connected to: 5V 88% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Servid rp2040-hdmi proto rev1 by baldengineer, Opentrig by Dawson-HEP, 8510C-Tang-Nano-9K-FPGA by ik2biy and Epaper hat by jabr0ni.
The TXB0108PW in open source designs
The gallery holds 8 open source boards using the TXB0108PW from 8 GitHub repositories; a typical one measures about 92.8 × 68.7 mm and carries around 42 components.
75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Servid rp2040-hdmi proto rev1 by baldengineer.
Parts used alongside the TXB0108PW
Microcontrollers on boards using the TXB0108PW
What boards using the TXB0108PW are built for
TXB0108PW: common questions
Where can I find a TXB0108PW reference design?
Each of the 8 boards on this page is a real design using the TXB0108PW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXB0108PW VCCA pin?
The VCCA pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the TXB0108PW.
What decoupling capacitors do designs use on the TXB0108PW VCCB pin?
The VCCB pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the TXB0108PW.
Which microcontrollers do boards using the TXB0108PW use?
Most are built on RP2040/RP2350 (2), AVR/Arduino (1) and Raspberry Pi (1).
How big is a typical board using the TXB0108PW?
The median is 92.8 × 68.7 mm, and 75% are two-layer designs.
What is the most popular open source board using the TXB0108PW?
By GitHub stars, Servid rp2040-hdmi proto rev1 by baldengineer, with 33 stars.
Can I simulate one of these boards using the TXB0108PW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.