Quadcopter boostbuck
About the Quadcopter boostbuck PCB
Quadcopter boostbuck is an open source PCB design by ajwock, published on GitHub. It is a 2-layer board measuring 31.1 × 13.3 mm, with 14 components from 14 distinct parts.
By type, the board carries 6 capacitors, 5 resistors, 1 IC and 1 inductor.
It belongs with the robotics & motion designs in this gallery.
From the project
Quadcopter designed and programmed thoroughly from scratch
Quadcopter boostbuck bill of materials (BOM)
14 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3pin_header | 3-bb | U1 |
| 1 | LTC3534EGN#PBF | SOP64P601X175-16N | 1 |
| 1 | 3.3uH | inductor_smt | L1 |
| 1 | .056u | C_0201_0603Metric | C1 |
| 1 | 66p | C_0201_0603Metric | C2 |
| 1 | 10p | C_0201_0603Metric | C3 |
| 1 | 470p | C_0201_0603Metric | C4 |
| 1 | 22u | C_0201_0603Metric | C5 |
| 1 | 10u | C_0201_0603Metric | C6 |
| 1 | 200k | R_0201_0603Metric | R1 |
| 1 | 10k | R_0201_0603Metric | R2 |
| 1 | 15k | R_0201_0603Metric | R3 |
| 1 | 374k | R_0201_0603Metric | R4 |
| 1 | 162k | R_0201_0603Metric | R5 |
Quadcopter boostbuck design files
The KiCad project lives in the ajwock/quadcopter repository on GitHub; these links point at the commit this page was built from.
Quadcopter boostbuck: common questions
How big is the Quadcopter boostbuck PCB?
The Quadcopter boostbuck measures 31.1 × 13.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Quadcopter boostbuck?
14 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Quadcopter boostbuck design files?
From the ajwock/quadcopter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Quadcopter boostbuck design in my own project?
The repository has no license, so all rights stay with ajwock. Use it as a reference, and ask the author before reusing the design.
More boards in quadcopter
ESP32Quad unibody
63.5 × 55.9 mm67 parts2LNo license14
ESP32Quad unibody placement0
50.8 × 45.7 mm64 parts2LNo license14
ESP32Home copter 2
41.9 × 38.7 mm63 parts2LNo license14
ESP32Home copter
41.9 × 38.7 mm63 parts2LNo license14
ESP32S3 mini cam
44.5 × 33 mm58 parts2LNo license14
ESP32S3 cam
44.5 × 33 mm58 parts2LNo license14
Quadcopter
34.3 × 85.1 mm41 parts2LNo license14
ESP32Quad direct
27.7 × 50.6 mm37 parts2LNo license14
ESP32Esp with imu
23.4 × 47.2 mm23 parts2LNo license14
Quadcopter boostbuck small
25.4 × 10.2 mm14 parts2LNo license14
Proximity sensor
13.5 × 9.1 mm7 parts2LNo license14
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
11ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979
Diff driver
32 × 22 mm14 parts2LGPL-3.0979