Proximity sensor
About the Proximity sensor PCB
Proximity sensor is an open source PCB design by ajwock, published on GitHub. It is a 2-layer board measuring 13.5 × 9.1 mm, with 7 components from 6 distinct parts.
By type, the board carries 3 capacitors, 2 resistors and 1 IC.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
Quadcopter designed and programmed thoroughly from scratch
Proximity sensor bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4pin_header | 4-bb | U1 |
| 1 | VCNL3040 | SON108P200X400X115-8N | 1 |
| 1 | 0.1uF | 0603_cap | C1 |
| 1 | 1uF | 0603_cap | C2 |
| 1 | 22uF | 0603_cap | C3 |
| 2 | 2.2k | 0603_resistor | R1, R2 |
Proximity sensor design files
The KiCad project lives in the ajwock/quadcopter repository on GitHub; these links point at the commit this page was built from.
Proximity sensor: common questions
How big is the Proximity sensor PCB?
The Proximity sensor measures 13.5 × 9.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Proximity sensor?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Proximity sensor design files?
From the ajwock/quadcopter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Proximity sensor design in my own project?
The repository has no license, so all rights stay with ajwock. Use it as a reference, and ask the author before reusing the design.
More boards in quadcopter
ESP32Quad unibody
63.5 × 55.9 mm67 parts2LNo license14
ESP32Quad unibody placement0
50.8 × 45.7 mm64 parts2LNo license14
ESP32Home copter 2
41.9 × 38.7 mm63 parts2LNo license14
ESP32Home copter
41.9 × 38.7 mm63 parts2LNo license14
ESP32S3 mini cam
44.5 × 33 mm58 parts2LNo license14
ESP32S3 cam
44.5 × 33 mm58 parts2LNo license14
Quadcopter
34.3 × 85.1 mm41 parts2LNo license14
ESP32Quad direct
27.7 × 50.6 mm37 parts2LNo license14
ESP32Esp with imu
23.4 × 47.2 mm23 parts2LNo license14
Quadcopter boostbuck
31.1 × 13.3 mm14 parts2LNo license14
Quadcopter boostbuck small
25.4 × 10.2 mm14 parts2LNo license14
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k