Bulk-Impedance-Measurement
AkshatSharma05·Bulk-Impedance-Measurement
About the Bulk-Impedance-Measurement PCB
Bulk-Impedance-Measurement is an open source ESP32 PCB design by AkshatSharma05, published on GitHub. It is a 2-layer board measuring 38.8 × 55 mm, with 28 components from 16 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AD9833xRM, TLV2372ID and AMS1117-3.3. By type, the board carries 9 resistors, 8 capacitors, 4 ICs, 3 connectors, 3 switches and 1 crystal.
It belongs with the test & measurement designs in this gallery.
From the project
PCB Design and Schematic for a Bulk Impedance Measurement Tool
This repository contains the PCB design for a bulk impedance measurement tool built around an ESP32, an AD9833 DDS signal generator, and the internal ADC for measurement.
The system generates a sinusoidal excitation signal, conditions and buffers it, and applies it to a voltage divider formed by a known resistor (Rknown) and an external unknown impedance (Zunknown). The ESP32 measures the input and output voltages using its ADC and computes the unknown impedance using:
Main components on the Bulk-Impedance-Measurement
Bulk-Impedance-Measurement bill of materials (BOM)
28 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | AD9833xRM | MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | TLV2372ID | SOIC127P599X175-8N | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | 25MHz | Oscillator_DIP-8 | Y2 |
| 2 | Conn_01x01_Socket | BNC_TEConnectivity_1478204_Vertical | J1, J2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 2 | SW_Push | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1, SW2 |
| 1 | SW_DIP_x03 | SW_DIP_SPSTx03_Slide_KingTek_DSHP03TJ_W5.25mm_P1.27mm_JPin | SW4 |
| 1 | 22uF | C_0201_0603Metric | C2 |
| 1 | 1uF | C_0201_0603Metric | C3 |
| 1 | 22pF | C_0201_0603Metric | C5 |
| 5 | 100nF | C_0201_0603Metric | C6, C7, C8, C9, C10 |
| 1 | R | R_0603_1608Metric | R1 |
| 3 | 1K | R_0603_1608Metric | R2, R6, R7 |
| 5 | 10K | R_0603_1608Metric | R3, R4, R5, R8, R9 |
Bulk-Impedance-Measurement design files
The KiCad project lives in the AkshatSharma05/Bulk-Impedance-Measurement repository on GitHub; these links point at the commit this page was built from.
- Layoutpotentiostat.kicad_pcb
- Schematicpotentiostat.kicad_sch
Bulk-Impedance-Measurement: common questions
What microcontroller does the Bulk-Impedance-Measurement use?
The Bulk-Impedance-Measurement is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Bulk-Impedance-Measurement PCB?
The Bulk-Impedance-Measurement measures 38.8 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bulk-Impedance-Measurement?
28 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bulk-Impedance-Measurement design files?
From the AkshatSharma05/Bulk-Impedance-Measurement repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bulk-Impedance-Measurement design in my own project?
The repository has no license, so all rights stay with AkshatSharma05. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bulk-Impedance-Measurement without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k