317 open source boards using the ESP32-WROOM-32
Real designs built with the ESP32-WROOM-32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Upsy desky
tjhorner
40.9 × 58 mm44 parts2LNo license833ESP32
HB-RF-ETH
alexreinert
85 × 56 mm86 parts2LCC-BY-NC-4.0104ESP32
Womo
muccc
254.9 × 150.1 mm532 parts4LGPL-3.084ESP32
Esp32-4-channel relays
leomanangka
86.4 × 86.6 mm59 parts2LCERN-OHL-P-2.070ESP32
Wii-Bluetooth-Replacement
JSnowden33
30.8 × 24.4 mm19 parts2LGPL-3.048ESP32
DIY-Signal-Generator
daumemo
84.1 × 47.3 mm139 parts2LMIT45ESP32
WLED ESP32 Controller
Hasenpups
62.2 × 30.5 mm22 parts2LCC-BY-NC-4.044ESP32
Hardware design
Open-Authenticator
82 × 42 mm56 parts2LMIT42ESP32
Vr15
zhyma
30 × 35 mm41 parts2LNo license30ESP32
ESP32ETH
nuclearcat
40 × 68 mm32 parts2LLGPL-2.130ESP32
ESP-32 WLED-Controller
der-pw
59.5 × 31.2 mm19 parts2LNo license29ESP32
Charge Controller
jharvey
139.7 × 88.9 mm157 parts2LNo license24ESP32
QLAMP-main
hisashin
142 × 58 mm143 parts2LGPL-3.024ESP32
Pcb power usb
angelnu
95.8 × 30.5 mm52 parts2LApache-2.024ESP32
ESP32-Development-Board
jminjares4
28.5 × 53.7 mm36 parts2LNo license21ESP32
Light control
matthewlai
59.7 × 48.3 mm73 parts4LGPL-3.020ESP32
WLED All in one ESP32 Controller
Hasenpups
49.3 × 30.5 mm21 parts2LCC-BY-NC-4.019ESP32
Clock
Matir
196.7 × 31.5 mm90 parts2LBSD-2-Clause18STM32
FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
mnemocron
158 × 95 mm258 parts4LGPL-3.016ESP32
Colors of italy
valerionew
94 parts2LNo license16ESP32
Obsidian-ESP32
singleboardsolutions
65 × 56 mm51 parts2LCERN-OHL-1.216ESP32
Drone
PlumPot55
36.2 × 36.2 mm42 parts2LNo license15ESP32
Feuchtraumabzweigdose
transportkollektiv
45.7 × 63.5 mm35 parts2LCC-BY-4.014ESP32
Lora node esp32 smd GPS
Christophe45
71.1 × 109.2 mm32 parts2LNo license14ESP32
Drone
rmingon
117.4 × 117.4 mm49 parts2LNo license12ESP32
Esp32
sourabhmisal
151.1 × 100.3 mm40 parts2LCC0-1.012ESP32
STM32L0-ESP32-Breakout-Board
mohamedyanis
50 × 50 mm31 parts4LBSD-3-Clause12ESP32
ESP32-Sensor-Data-Logger
jminjares4
83.8 × 41.4 mm67 parts2LNo license11ESP32
IndiaNavi
theBrutzler
111.7 × 137 mm101 parts4LNo license10ESP32
CAN-to-WiFi-Converter-Dongle-
ampnics
47.5 × 71.5 mm68 parts2LNo license10ESP32
4 channel home automation
ampnics
95 × 55 mm62 parts2LNo license10ESP32
Hardware v2
rmingon
40 × 78 mm54 parts2LNo license10ESP32
ESP32-Zip
vintlabs
65 × 30 mm37 parts4LGPL-3.010ESP32
Wifi rfid uhf reader
OpenLaundry
50 × 50 mm23 parts2LNo license8ESP32
Main board
felixzero
84.5 × 54.6 mm75 parts2LGPL-3.07ESP32
Modbus RTU mirror side board
galopago
52 × 40 mm38 parts2LCC-BY-4.07
How designs wire the ESP32-WROOM-32
Read from the KiCad layouts of 256 open source designs, one per repository: what each pin of the ESP32-WROOM-32 connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 200 of 253 designs, most often 10 kΩ (then 12 kΩ).
- The SDO/SD0 pin is left unconnected on 233 of 248 designs (a signal on 15).
- The SCK/CLK pin is left unconnected on 231 of 249 designs (a signal on 18).
- The SCS/CMD pin is left unconnected on 230 of 246 designs (5V on 2, a signal on 14).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 15, 38, 39 | Connected to: GND 95% | — |
| VDDpin 2 | Connected to: 3.3V 90% |
|
| ENpin 3 | Connected to: A connector 21% |
|
| SENSOR_VPpin 4 | Connected to: Not connected 71% · a signal 28% | — |
| SENSOR_VNpin 5 | Connected to: Not connected 77% · a signal 23% | — |
| SHD/SD2pin 17 | Connected to: Not connected 93% | — |
| SWP/SD3pin 18 | Connected to: Not connected 93% | — |
| SCS/CMDpin 19 | Connected to: Not connected 93% | — |
| SCK/CLKpin 20 | Connected to: Not connected 93% | — |
| SDO/SD0pin 21 | Connected to: Not connected 94% | — |
| SDI/SD1pin 22 | Connected to: Not connected 93% | — |
| IO0pin 25 | Connected to: A connector 21% |
|
| NCpin 32 | Connected to: Not connected 99% | — |
23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Upsy desky by tjhorner, Protoesp by CRImier, HB-RF-ETH by alexreinert and Womo by muccc.
The ESP32-WROOM-32 in open source designs
The gallery holds 317 open source boards using the ESP32-WROOM-32 from 282 GitHub repositories; a typical one measures about 74 × 60 mm and carries around 44 components.
82% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Upsy desky by tjhorner.
Parts used alongside the ESP32-WROOM-32
Microcontrollers on boards using the ESP32-WROOM-32
What boards using the ESP32-WROOM-32 are built for
ESP32-WROOM-32: common questions
Where can I find a ESP32-WROOM-32 reference design?
Each of the 317 boards on this page is a real design using the ESP32-WROOM-32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-WROOM-32 EN pin?
The EN pin has a pull-up to 3.3V on 200 of 253 designs, most often 10 kΩ (then 12 kΩ). Counted from the KiCad layouts of 256 open source designs using the ESP32-WROOM-32.
How is the ESP32-WROOM-32 SDO/SD0 pin connected?
The SDO/SD0 pin is left unconnected on 233 of 248 designs (a signal on 15). Counted from the KiCad layouts of 256 open source designs using the ESP32-WROOM-32.
How is the ESP32-WROOM-32 SCK/CLK pin connected?
The SCK/CLK pin is left unconnected on 231 of 249 designs (a signal on 18). Counted from the KiCad layouts of 256 open source designs using the ESP32-WROOM-32.
What parts are used alongside the ESP32-WROOM-32?
The AMS1117-3.3, CH340C, CP2102N-Axx-xQFN28, AP2112K-3.3 and PC817 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-WROOM-32 use?
Most are built on ESP32 (312), RP2040/RP2350 (4) and STM32 (1).
How big is a typical board using the ESP32-WROOM-32?
The median is 74 × 60 mm, and 82% are two-layer designs.
What is the most popular open source board using the ESP32-WROOM-32?
By GitHub stars, Upsy desky by tjhorner, with 833 stars.
Can I simulate one of these boards using the ESP32-WROOM-32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.