Audio-Preamp
AlecRossCS·Audio-Preamp·hardware_design_files/Audio_Preamp.kicad_pcb
About the Audio-Preamp PCB
Audio-Preamp is an open source PCB design by AlecRossCS, published on GitHub. It is a 4-layer board measuring 90 × 75 mm, with 128 components from 36 distinct parts.
Other key parts include the NE5532, LM317_TO-220 and LM337_TO220. By type, the board carries 56 capacitors, 54 resistors, 9 ICs, 3 connectors, 2 transistors and 1 diode.
It belongs with the audio designs in this gallery.
From the project
This is an analog audio preamplifier, designed on first principles as well as help from Small Signal Audio Design by Douglas Self
Main components on the Audio-Preamp
Audio-Preamp bill of materials (BOM)
128 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | NE5532 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U5, U6, U7, U8, U9 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U3 |
| 1 | LM337_TO220 | TO-220-3_Vertical | U4 |
| 1 | Q_NPN_CBE | SOT-23 | Q1 |
| 1 | Q_PNP_CBE | SOT-23 | Q2 |
| 1 | Barrel_Jack | BarrelJack_Wuerth_6941xx301002 | J1 |
| 2 | AudioJack3 | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J2, J3 |
| 1 | 5k | Potentiometer_Alps_RK163_Dual_Horizontal | RV1 |
| 2 | 10k | Potentiometer_Alps_RK163_Dual_Horizontal | RV2, RV3 |
| 1 | D_Bridge_+-AA | Diode_Bridge_Vishay_DFS | D1 |
| 20 | 470n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C7, C8, C9, C16 +12 |
| 6 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6, C13, C14, C31, C32 |
| 6 | 100p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C15, C33, C34, C35, C36 |
| 2 | 4.4n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C19 |
| 2 | 2.2n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C20 |
| 8 | 100u | CP_Radial_D6.3mm_P2.50mm | C21, C22, C24, C25, C26, C27, C28, C30 |
| 4 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23, C29, C43, C46 |
| 2 | 4.7n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C44, C47 |
| 2 | 22p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C45, C48 |
| 2 | 47p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C53, C54 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C55, C56 |
| 2 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R10 |
| 8 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R13, R14, R27, R28, R33, R34 |
| 2 | 220k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R11 |
| 6 | 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R12, R38, R42, R51, R52 |
| 10 | 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R16, R17, R37, R40, R41, R44 +2 |
| 2 | 82k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R18 |
| 4 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R15, R47, R48 |
| 2 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R24 |
| 2 | 120 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R23 |
| 2 | 1.32k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R22 |
| 4 | 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26, R31, R32 |
| 4 | 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R30, R35, R36 |
| 2 | 9.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39, R43 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45, R46 |
| 2 | 68 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R49, R50 |
Audio-Preamp design files
The KiCad project lives in the AlecRossCS/Audio-Preamp repository on GitHub; these links point at the commit this page was built from.
Audio-Preamp: common questions
How big is the Audio-Preamp PCB?
The Audio-Preamp measures 90 × 75 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Audio-Preamp?
128 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Audio-Preamp design files?
From the AlecRossCS/Audio-Preamp repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Audio-Preamp design in my own project?
The repository has no license, so all rights stay with AlecRossCS. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687