Cloud dripper
AlessioMorale·cloud_dripper
About the Cloud dripper PCB
Cloud dripper is an open source ESP32 PCB design by AlessioMorale, published on GitHub under the MIT license. It is a 2-layer board measuring 50.8 × 50.8 mm, with 59 components from 31 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the R-78E5.0-1.0 and AMS1117-3.3. By type, the board carries 16 capacitors, 13 resistors, 11 connectors, 10 diodes, 3 ICs and 3 transistors.
From the project
An ESP32-based indoor watering controller
Main components on the Cloud dripper
Cloud dripper bill of materials (BOM)
59 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R-78E5.0-1.0 | Converter_DCDC_RECOM_R-78E-0.5_THT | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | ESP32-C3-MINI-1 | ESP32-C3-MINI-1 | U3 |
| 3 | AO3400A | SOT-23 | Q1, Q2, Q3 |
| 1 | I2C | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J2 |
| 1 | SERIAL | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | PWR | Molex_Micro-Fit_3.0_43045-0200_2x01_P3.00mm_Horizontal | J4 |
| 1 | P1 | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | P2 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | P3 | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | LED | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J8 |
| 1 | S1 | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J9 |
| 1 | S2 | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J10 |
| 1 | S3 | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J11 |
| 1 | Boot/Option | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | BOOT1 |
| 1 | 5V_ONLY 5V_Only | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | led | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | 1 | LED_0805_2012Metric | D1 |
| 1 | 2 | LED_0805_2012Metric | D2 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3 | LED_0805_2012Metric | D3 |
| 3 | ~ | D_SMA | D4, D5, D6 |
| 1 | BAT54C | SOT-23 | D7 |
| 2 | WS2812B | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D8, D9 |
| 1 | SM4001PL | D_SOD-123F | D10 |
| 2 | 1 | C_0402_1005Metric | C1, C4 |
| 4 | 10 | C_0805_2012Metric | C2, C5, C9, C10 |
| 9 | 0.1 | C_0402_1005Metric | C3, C6, C7, C8, C11, C12, C13, C14 +1 |
| 1 | 100UF 100uF | CP_Elec_6.3x5.8 | C16 |
| 10 | 10K 10k | R_0402_1005Metric | R1, R4, R5, R6, R10, R11, R12, R13 +2 |
| 3 | 22 | R_0402_1005Metric | R7, R8, R9 |
Cloud dripper design files
The KiCad project lives in the AlessioMorale/cloud_dripper repository on GitHub; these links point at the commit this page was built from.
- Layoutcloud_dripper.kicad_pcb
- Schematiccloud_dripper.kicad_sch
- BOMproduction/bom.csv
Cloud dripper: common questions
What microcontroller does the Cloud dripper use?
The Cloud dripper is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the Cloud dripper PCB?
The Cloud dripper measures 50.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cloud dripper?
59 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cloud dripper design files?
From the AlessioMorale/cloud_dripper repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cloud dripper design in my own project?
Yes, under the terms of its MIT license, which AlessioMorale chose for the repository.
Can I test firmware for the Cloud dripper without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k