Peredatchik esp32
alexeyoskin·peredatchik-esp32
About the Peredatchik esp32 PCB
Peredatchik esp32 is an open source ESP32 PCB design by alexeyoskin, published on GitHub. It is a 2-layer board measuring 56.5 × 58 mm, with 33 components from 19 distinct parts.
Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. By type, the board carries 12 resistors, 7 capacitors, 1 module and 1 LED.
From the project
Выполнил: Оськин А.А., группа БМТ2-31М Кафедра БМТ-2, МГТУ им. Н.Э. Баумана Проверил: Рязанцев П.
Выполнил: Оськин А.А., группа БМТ2-31М Кафедра БМТ-2, МГТУ им. Н.Э. Баумана Проверил: Рязанцев П.
Репозиторий: https://github.com/alexeyoskin/peredatchik-esp32
Создать проект печатной платы в KiCad. Проект должен содержать:
1. Библиотеку компонентов (УГО и посадочные места). УГО оформлены по ГОСТ, библиотека подключается к проекту как git-сабмодуль, пути к библиотекам относительные. 2. Схему электрическую принципиальную по ГОСТ с рамкой и основной надписью. Важные цепи описаны в классах цепей. У компонентов есть поле Manufacturer\Part\Number с реальным партномером. 3. Файл печатной платы…
Main components on the Peredatchik esp32
Peredatchik esp32 bill of materials (BOM)
33 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E-N4 ESP32-WROOM-32 | ESP32-WROOM-32 | A1 |
| 1 | TP4054 | SOT-23-5 | DA1 |
| 1 | MAX809SEUR+T MAX809 | SOT-23-3 | DA2 |
| 1 | XC6206P332MR XC6206 | SOT-23 | DA3 |
| 1 | PKLCS1212E4001-R1 Buzzer | Buzzer_Murata_PKLCS1212E | HA1 |
| 2 | MJTP1243 SW_Push | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SB1, SB2 |
| 2 | 61300211121 SW_Push | PinHeader_1x02_P2.54mm_Vertical | SB3, SB4 |
| 1 | MMBT3904 NPN | SOT-23-3 | VT1 |
| 1 | AO3400A NMOS | SOT-23-3 | VT2 |
| 1 | 61300411121 FTDI | PinHeader_1x04_P2.54mm_Vertical | XP1 |
| 1 | USB4135-GF-A USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | XS1 |
| 1 | APHHS1005CGCK Green_LED | LED_0402_1005Metric | HL1 |
| 3 | CL31A106KAHNNNE 1206 10mk 5% | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5, C6 |
| 1 | CL31A475KAHNNNE 1206 4.7 мкФ 5% | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 2 | UVR1C100MDD 10 мк × 16 В | CP_Radial_D5.0mm_P2.50mm | C3, C4 |
| 1 | CL31B105KBHNNNE 1206 1mk 5% | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 7 | RC1206JR-071KL 1K | R_1206_3216Metric | R1, R2, R3, R4, R6, R7, R9 |
| 1 | RC1206JR-072KL 2K | R_1206_3216Metric | R5 |
| 4 | RC1206JR-0710KL 10K | R_1206_3216Metric | R8, R10, R11, R12 |
Peredatchik esp32 design files
The KiCad project lives in the alexeyoskin/peredatchik-esp32 repository on GitHub; these links point at the commit this page was built from.
- Layoutesp32.kicad_pcb
- Schematicesp32.kicad_sch
Peredatchik esp32: common questions
What microcontroller does the Peredatchik esp32 use?
The Peredatchik esp32 is built around the ESP32-WROOM-32E-N4, from the ESP32 family.
How big is the Peredatchik esp32 PCB?
The Peredatchik esp32 measures 56.5 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Peredatchik esp32?
33 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Peredatchik esp32 design files?
From the alexeyoskin/peredatchik-esp32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Peredatchik esp32 design in my own project?
The repository has no license, so all rights stay with alexeyoskin. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Peredatchik esp32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k