111 open source boards using the ESP32-WROOM-32E-N4

Real designs built with the ESP32-WROOM-32E-N4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

111 boardsClear filters|Most starred

How designs wire the ESP32-WROOM-32E-N4

Read from the KiCad layouts of 57 open source designs, one per repository: what each pin of the ESP32-WROOM-32E-N4 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 55 of 57 designs, most often 10 kΩ (then 1 kΩ).
  • The EN pin has a capacitor to GND on 51 of 57 designs, most often 1 µF (then 100 nF).
  • The NC_7 pin is left unconnected on 56 of 57 designs.
  • The 3V3 pin is tied to 3.3V on 55 of 57 designs (a signal on 2).
GND_1pin 1Connected to: GND 98%
3V3pin 2Connected to: 3.3V 96%
ENpin 3Connected to: A connector 56%
  • Pull-up to 3.3V on 96% · 10 kΩ (51), 1 kΩ (1), 12 kΩ (1)
  • Capacitor to GND on 89% · 1 µF (40), 100 nF (6), 2.2 nF (3)
GND_2pin 15Connected to: GND 98%
NC_1pin 17Connected to: Not connected 91%
NC_2pin 18Connected to: Not connected 91%
NC_3pin 19Connected to: Not connected 91%
NC_4pin 20Connected to: Not connected 91%
NC_5pin 21Connected to: Not connected 91%
NC_6pin 22Connected to: Not connected 91%
IO0pin 25Connected to: A connector 33%
  • Pull-up to 3.3V on 79% · 10 kΩ (39), 12 kΩ (1)
IO4pin 26Connected to: A connector 21% · not connected 23%
  • Series resistor on 33% · 1 kΩ (15), 330 Ω (1), 4.7 kΩ (1)
IO16pin 27Connected to: A connector 25% · not connected 18%
  • Series resistor on 46% · 220 Ω (12), 22 Ω (3), 10 Ω (2)
IO18pin 30Connected to: A connector 47%
  • Series resistor on 33% · 1 kΩ (13), 100 Ω (2), 39 Ω (1)
NC_7pin 32Connected to: Not connected 98%
IO21pin 33Connected to: A connector 51%
  • Pull-up to 3.3V on 32% · 4.7 kΩ (9), 1.2 kΩ (3), 10 kΩ (3)
IO23pin 37Connected to: A connector 44% · not connected 23%
  • Series resistor on 35% · 1 kΩ (14), 10 kΩ (2), 220 Ω (2)
GND_3pin 38Connected to: GND 98%
GND_4pin 39Connected to: GND 98%

20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kv4p ht by VanceVagell, ESP32-GATEWAY Rev A by OLIMEX, ESP32-EVB Rev A by OLIMEX and ESP32-PoE-ISO Rev J by OLIMEX.

The ESP32-WROOM-32E-N4 in open source designs

The gallery holds 111 open source boards using the ESP32-WROOM-32E-N4 from 61 GitHub repositories; a typical one measures about 75.2 × 74.7 mm and carries around 109 components.

56% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Kv4p ht metal case by VanceVagell.

Microcontrollers on boards using the ESP32-WROOM-32E-N4

ESP32-WROOM-32E-N4: common questions

Where can I find a ESP32-WROOM-32E-N4 reference design?

Each of the 111 boards on this page is a real design using the ESP32-WROOM-32E-N4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-WROOM-32E-N4 EN pin?

The EN pin has a pull-up to 3.3V on 55 of 57 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 57 open source designs using the ESP32-WROOM-32E-N4.

How is the ESP32-WROOM-32E-N4 NC_7 pin connected?

The NC_7 pin is left unconnected on 56 of 57 designs. Counted from the KiCad layouts of 57 open source designs using the ESP32-WROOM-32E-N4.

How is the ESP32-WROOM-32E-N4 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 55 of 57 designs (a signal on 2). Counted from the KiCad layouts of 57 open source designs using the ESP32-WROOM-32E-N4.

What parts are used alongside the ESP32-WROOM-32E-N4?

The USBLC6-2SC6, AZ1117H-3.3TRE1, DMP1045U-7, MMDT2907A-7-F and AMS1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-WROOM-32E-N4 use?

Most are built on ESP32 (111).

How big is a typical board using the ESP32-WROOM-32E-N4?

The median is 75.2 × 74.7 mm, and 56% are two-layer designs.

What is the most popular open source board using the ESP32-WROOM-32E-N4?

By GitHub stars, Kv4p ht metal case by VanceVagell, with 827 stars.

Can I simulate one of these boards using the ESP32-WROOM-32E-N4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part