PCB Schematics

AlexJew·PCB_Schematics

PCB Schematics layout, top view — open source ESP32 board by AlexJew

About the PCB Schematics

PCB Schematics is an open source ESP32 PCB design by AlexJew, published on GitHub. It is a 2-layer board measuring 83.8 × 86.4 mm, with 17 components from 13 distinct parts.

Its main chip is the ESP32-DevKitC, from the ESP32 family. By type, the board carries 9 resistors, 3 connectors, 2 transistors, 2 diodes and 1 IC.

Main components on the PCB Schematics

PCB Schematics bill of materials (BOM)

17 components, 13 distinct parts.

QtyPartRefs
1
ESP32-DevKitC
U1
2
2N7000
Q1, Q2
1
Screw_Terminal_01x02
J2
2
Screw_Terminal_01x03
J4, J5
1
1N4007
D1
1
BZV55B3V3
D2
1
2k7
R1
2
100
R2, R4
1
1k2
R3
1
47k
R5
1
56k
R6
1
220
R7
2
100k
R8, R9

PCB Schematics design files

The KiCad project lives in the AlexJew/PCB_Schematics repository on GitHub; these links point at the commit this page was built from.

PCB Schematics: common questions

What microcontroller does the PCB Schematics use?

The PCB Schematics is built around the ESP32-DevKitC, from the ESP32 family.

How big is the PCB Schematics?

The PCB Schematics measures 83.8 × 86.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB Schematics?

17 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB Schematics design files?

From the AlexJew/PCB_Schematics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB Schematics design in my own project?

The repository has no license, so all rights stay with AlexJew. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB Schematics without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards