82 open source boards using the ESP32-DEVKITC
Real designs built with the ESP32-DEVKITC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Split flap
tinkermax
99.9 × 99.9 mm24 parts2LCC-BY-4.013ESP32
ESP32 16
computergeek1507
142.1 × 90.8 mm91 parts2LCERN-OHL-1.210ESP32
ENHP
sebmorales
76.3 × 105.1 mm44 parts2LNo license9ESP32
Esp32-fan controller
merlindorin
85 × 155 mm38 parts2LMIT8ESP32
TR-808 clone
mkomakonkon
442 × 421.7 mm1268 parts2LNo license5ESP32
Ai robot hardware
robot-uprising-hq
30.5 × 62 mm22 parts2LNo license5ESP32
The-SaxplayerTM
tenorangesax
116.8 × 53.9 mm19 parts2LNo license4ESP32
ARG OSCI HARDWARE
ArgOsciProyect
113 × 50 mm56 parts2LCustom license3ESP32
Watch cleaner
DavidJ-Saving-Time
97.5 × 69 mm14 parts2LMIT3- schematic only · 4 partsESP32
Smart compass
durki007
4 parts2LNo license3 ESP32
ProyectoRFID
Tintun1
49.8 × 57.6 mm23 parts2LNo license2ESP32
Kimera Base
TheClanLabs
114.3 × 30.5 mm2 parts2LNo license2ESP32
Schemav2
rayanyahiaoui13
160.5 × 146.5 mm139 parts2LGPL-3.01ESP32
Retro-TV
Shadow220108
88.8 × 50.3 mm102 parts2LNo license1ESP32
ESP32 sprinkler timer
rgodin974
135.3 × 211.3 mm99 parts2LNo license1ESP32
Wxyangf air purifier box
wxyangf
100 × 100 mm62 parts2LAGPL-3.01ESP32
SpeakerSystem
Chill-Sam
100 × 76 mm44 parts2LNo license1ESP32
Moisture sensor hardware
IMHarris
111 × 58 mm34 parts2LCC-BY-SA-4.01ESP32
Capstone ece4900
gworkman
68.6 × 62.2 mm25 parts4LNo license1ESP32
D75-FilamentExtruder
LMHDPRO
91.8 × 100.6 mm24 parts2LMIT1ESP32
Music kit
YogPanjarale
134 × 75 mm15 parts2LMIT1ESP32
Portablehacker
linuskjk
44.6 × 132.8 mm5 parts2LMIT1ESP32
Robot
jgraulle
100 × 100 mm183 parts2LNo license0ESP32
Sunrise clock main board
atoomnetmarc
160 × 106.7 mm124 parts2LApache-2.00ESP32
Rc car esp32
Carlos-Santos-prog
80 × 130 mm92 parts2LMIT0ESP32
SPG27 Micro Mouse
daisuke-ym
80 × 150 mm87 parts2LNo license0ESP32
Neo
IstratieStefan
119.1 × 121 mm80 parts2LMIT0ESP32
AutoMate
reubenvanka
273 × 239.8 mm71 parts8LNo license0ESP32
Duckhouse
cstapels
103 × 93.5 mm60 parts2LGPL-3.00ESP32
Engine-Simulator-2.0
koolcat6666
100 × 100 mm58 parts2LMIT0ESP32
Pokepico hardware MFT2019
chip-da-tunetaro
90 × 60 mm54 parts2LNo license0ESP32
Thermostat
fortcollinscreatorhub
93.6 × 83.1 mm54 parts2LGPL-3.00ESP32
Metrodisplay
vuktacic
99.2 × 52.8 mm53 parts2LMIT0ESP32
SLAM-Robot
BigBrain244466666
146.5 × 99.4 mm50 parts2LNo license0ESP32
PROYECTO COMPLETO MOLLI
mollilla
89.5 × 84.9 mm49 parts2LNo license0ESP32
Pcb
auto-watering
188 × 91.4 mm46 parts2LCERN-OHL-S-2.00
How designs wire the ESP32-DEVKITC
Read from the KiCad layouts of 65 open source designs, one per repository: what each pin of the ESP32-DEVKITC connects to, and the resistors, capacitors and other passives placed on it.
- The SD_DATA2/GPIO9 pin is left unconnected on 58 of 60 designs.
- The CMD pin is left unconnected on 58 of 59 designs.
- The SD_DATA3/GPIO10 pin is left unconnected on 57 of 58 designs.
- The SD_CLK/GPIO6 pin is left unconnected on 57 of 58 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1 | Connected to: 3.3V 69% · not connected 22% | — |
| CHIP_PUpin 2 | Connected to: Not connected 78% · a signal 19% | — |
| SENSOR_VP/GPIO36/ADC1_CHpin 3 | Connected to: Not connected 70% · a signal 25% | — |
| SENSOR_VN/GPIO39/ADC1_CHpin 4 | Connected to: Not connected 67% · a signal 33% | — |
| MTDI/GPIO12/ADC2_CH5pin 13 | Connected to: Not connected 65% · a signal 34% | — |
| GNDpin 14, 32, 38 | Connected to: GND 91% | — |
| SD_DATA2/GPIO9pin 16 | Connected to: Not connected 97% | — |
| SD_DATA3/GPIO10pin 17 | Connected to: Not connected 98% | — |
| CMDpin 18 | Connected to: Not connected 98% | — |
| 5Vpin 19 | Connected to: 5V 69% · a signal 21% | — |
| SD_CLK/GPIO6pin 20 | Connected to: Not connected 98% | — |
| SD_DATA0/GPIO7pin 21 | Connected to: Not connected 97% | — |
| SD_DATA1/GPIO8pin 22 | Connected to: Not connected 97% | — |
| MTDO/GPIO15/ADC2_CH3pin 23 | Connected to: Not connected 65% · a signal 35% | — |
| ADC2_CH2/GPIO2pin 24 | Connected to: Not connected 74% · a signal 26% | — |
| GPIO0/BOOT/ADC2_CH1pin 25 | Connected to: Not connected 84% · a signal 16% | — |
| U0RXD/GPIO3pin 34 | Connected to: Not connected 84% · a signal 16% | — |
| U0TXD/GPIO1pin 35 | Connected to: Not connected 86% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Easyduino ESP32 by Hanqaqa, UmDevKit by paradise-fi, Split flap by tinkermax and ESP32-CAM Controller by computergeek1507.
The ESP32-DEVKITC in open source designs
The gallery holds 82 open source boards using the ESP32-DEVKITC from 68 GitHub repositories; a typical one measures about 90 × 85 mm and carries around 32 components.
96% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Easyduino ESP32 by Hanqaqa.
Parts used alongside the ESP32-DEVKITC
Microcontrollers on boards using the ESP32-DEVKITC
What boards using the ESP32-DEVKITC are built for
ESP32-DEVKITC: common questions
Where can I find a ESP32-DEVKITC reference design?
Each of the 82 boards on this page is a real design using the ESP32-DEVKITC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-DEVKITC SD_DATA2/GPIO9 pin connected?
The SD_DATA2/GPIO9 pin is left unconnected on 58 of 60 designs. Counted from the KiCad layouts of 65 open source designs using the ESP32-DEVKITC.
How is the ESP32-DEVKITC CMD pin connected?
The CMD pin is left unconnected on 58 of 59 designs. Counted from the KiCad layouts of 65 open source designs using the ESP32-DEVKITC.
How is the ESP32-DEVKITC SD_DATA3/GPIO10 pin connected?
The SD_DATA3/GPIO10 pin is left unconnected on 57 of 58 designs. Counted from the KiCad layouts of 65 open source designs using the ESP32-DEVKITC.
What parts are used alongside the ESP32-DEVKITC?
The L7805, 74HC595, PC817, 74AHCT125 and CNY70 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-DEVKITC use?
Most are built on ESP32 (82).
How big is a typical board using the ESP32-DEVKITC?
The median is 90 × 85 mm, and 96% are two-layer designs.
What is the most popular open source board using the ESP32-DEVKITC?
By GitHub stars, Easyduino ESP32 by Hanqaqa, with 754 stars.
Can I simulate one of these boards using the ESP32-DEVKITC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.