RobotBalanceador
AlexRuizDiaz·RobotBalanceador·Circuito/RobotBalanceador/RobotBalanceador.kicad_pcb
About the RobotBalanceador PCB
RobotBalanceador is an open source STM32 PCB design by AlexRuizDiaz, published on GitHub. It is a 2-layer board measuring 70 × 45 mm, with 61 components from 27 distinct parts.
Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the LMR62014XMF, AMS1117-3.3, MPU-6050 and DRV8870DDA. By type, the board carries 24 capacitors, 14 resistors, 7 ICs, 7 connectors, 6 diodes and 2 inductors.
It belongs with the robotics & motion designs in this gallery.
From the project
Robot balanceador de PSM2
Robot balanceador de PSM2 Requisitos: - Kicad 8.0.4 o mayor - STM32CubeIDE 1.14.0 o mayor
Main components on the RobotBalanceador
RobotBalanceador bill of materials (BOM)
61 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8TX STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 2 | LMR62014XMF | SOT-23-5 | U2, U4 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U5 |
| 2 | DRV8870DDA | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U6, U7 |
| 1 | 8MHZ 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | C6332197 ICSP | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | C132560 USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J2 |
| 1 | C5280493 Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 2 | C474906 ENCODER | TerminalBlock_bornier-2_P5.08mm | J4, J5 |
| 1 | C474906 MOT 1 | TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | C474906 MOT 2 | TerminalBlock_bornier-2_P5.08mm | J7 |
| 5 | 1N5819WS | D_SOD-323 | D1, D2, D3, D4, D5 |
| 1 | C2286 RED | LED_0603_1608Metric | D6 |
| 2 | 10U 10u | L_1008_2520Metric | L1, L2 |
| 10 | 100N 100n | C_0603_1608Metric | C1, C2, C3, C4, C5, C8, C18, C20 +2 |
| 2 | 30P 30p | C_0603_1608Metric | C6, C7 |
| 5 | 10U 10u | C_0603_1608Metric | C9, C12, C13, C15, C17 |
| 2 | 22U 22u | C_0805_2012Metric | C10, C11 |
| 2 | 330P 330p | C_0603_1608Metric | C14, C16 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2.2N 2.2n | C_0603_1608Metric | C19 |
| 2 | 47U 47u | CP_Elec_6.3x5.4 | C22, C23 |
| 5 | 10K 10k | R_0603_1608Metric | R1, R3, R4, R5, R8 |
| 2 | 82K 82k | R_0603_1608Metric | R2, R7 |
| 1 | 27K 27k | R_0603_1608Metric | R6 |
| 2 | 100M 100m | R_1206_3216Metric | R9, R10 |
| 4 | 1.5K 1.5k | R_0603_1608Metric | R11, R15, R16, R17 |
RobotBalanceador design files
The KiCad project lives in the AlexRuizDiaz/RobotBalanceador repository on GitHub; these links point at the commit this page was built from.
RobotBalanceador: common questions
What microcontroller does the RobotBalanceador use?
The RobotBalanceador is built around the STM32F103C8TX, from the STM32 family.
How big is the RobotBalanceador PCB?
The RobotBalanceador measures 70 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RobotBalanceador?
61 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RobotBalanceador design files?
From the AlexRuizDiaz/RobotBalanceador repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RobotBalanceador design in my own project?
The repository has no license, so all rights stay with AlexRuizDiaz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RobotBalanceador without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k