5 open source boards using the LMR62014XMF
Real designs built with the LMR62014XMF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Arvsom
antmicro
55 × 40 mm427 parts6LApache-2.045ESP32
Luftctl
ansemjo
56.6 × 25 mm40 parts2LNo license10ESP32
Helix vape
stevensun369
30 × 97 mm77 parts2LNo license1STM32
RobotBalanceador
AlexRuizDiaz
70 × 45 mm61 parts2LNo license0- schematic only · 106 partsNordic nRF
Tacx neo rev eng
massmog
106 partsNo license0
The LMR62014XMF in open source designs
The gallery holds 5 open source boards using the LMR62014XMF from 5 GitHub repositories; a typical one measures about 55.8 × 42.5 mm and carries around 77 components.
75% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Arvsom by antmicro.
Microcontrollers on boards using the LMR62014XMF
What boards using the LMR62014XMF are built for
LMR62014XMF: common questions
Where can I find a LMR62014XMF reference design?
Each of the 5 boards on this page is a real design using the LMR62014XMF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LMR62014XMF use?
Most are built on ESP32 (2), STM32 (2) and Nordic nRF (1).
How big is a typical board using the LMR62014XMF?
The median is 55.8 × 42.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the LMR62014XMF?
By GitHub stars, Arvsom by antmicro, with 45 stars.
Can I simulate one of these boards using the LMR62014XMF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.